Home » Store » Cisco » Cisco Interface Card » VWIC-2MFT-T1 Cisco 2-Port T1 RJ-48 Multiflex Trunk Voice/WAN Interface Card

VWIC-2MFT-T1 Cisco 2-Port T1 RJ-48 Multiflex Trunk Voice/WAN Interface Card

Cisco 2-port T1 multiflex trunk voice/WAN interface card with two RJ-48C ports and an integrated CSU/DSU.

Sourcing mission-critical hardware shouldn't mean gambling on auction sites or automated shopping carts. You get direct access to dedicated specialists who answer the phone, confirm exact compatibility, and deliver project-ready pricing built around your deployment timeline.

Home / Shop

VWIC-2MFT-T1 Cisco 2-Port T1 RJ-48 Multiflex Trunk Voice/WAN Interface Card
VWIC-2MFT-T1 Cisco 2-Port T1 RJ-48 Multiflex Trunk Voice/WAN Interface Card
VWIC-2MFT-T1 Cisco 2-Port T1 RJ-48 Multiflex Trunk Voice/WAN Interface Card

Home / Shop

VWIC-2MFT-T1 Cisco 2-Port T1 RJ-48 Multiflex Trunk Voice/WAN Interface Card

Model Number: VWIC-2MFT-T1
Cisco 2-port T1 multiflex trunk voice/WAN interface card with two RJ-48C ports and an integrated CSU/DSU.
Maximum quantity exceeded
Minimum purchase amount of 0 is required
Maximum purchase amount of 0 is allowed
Missing Inquiry Options
*Your Name:
*Your Email:
*Your Message:
Please send me a copy
0.000
Manufacturer: Cisco
Facebook
X
Email
LinkedIn
  • Description
  • Specifications

Two RJ-48C T1 ports, marked CTRLR T1 0 and CTRLR T1 1 on the faceplate, make the VWIC-2MFT-T1 a Cisco 2-port T1 multiflex trunk voice and WAN interface card. The integrated CSU/DSU lets the card act as a T1 trunk for voice and data, or as fractional n x 64-kbps service for Frame Relay and leased-line WANs.

Supported platforms are the Cisco 1800 series (modular), the 2800 series, the 3800 series and the ICS 7750. Cabling is one straight-through RJ-48C cable from each port to a T1 wall jack. Three LEDs mark loopback (LP), alarm (AL) and carrier detect (CD): LP and AL stay off in normal operation, and CD stays on.

Timing slips can occur if both ports are set as clock source line with different clock sources. The drop-and-insert model is the VWIC-2MFT-T1-DI, the 1-port card is the VWIC-1MFT-T1, and the 2-port E1 card is the VWIC-2MFT-E1. More voice and WAN cards are in Cisco interface cards.

Part numberVWIC-2MFT-T1
Type2-port T1 RJ-48 multiflex trunk voice/WAN interface card
Ports2 x T1, RJ-48C (CTRLR T1 0, CTRLR T1 1)
CSU/DSUIntegrated
ServicesVoice and data trunk; fractional n x 64 kbps WAN
CableStraight-through RJ-48C to RJ-48C
LEDsLP (yellow), AL (yellow), CD (green)
Clocking ruleBoth ports on clock source line must share one clock source
Drop-and-insert modelVWIC-2MFT-T1-DI
Related cardsVWIC-1MFT-T1, VWIC-2MFT-E1
Compatible withCisco 1800 series (modular), 2800 series, 3800 series, ICS 7750