Home / Shop
- Description
- Specifications
The WIC-1AM-V2 is a Cisco 1-port analog modem WAN interface card that originates or terminates analog telephone transmissions through an RJ-11 modular jack. It is the V2 card of the 1-port analog modem line, alongside the WIC-1AM, WIC-2AM and WIC-2AM-V2, and its modem firmware can be upgraded if Cisco releases a new image.
Supported protocols are all standard data speeds from 300 bps to 33.6 kbps (V.34bis), V.42bis and MNP 5 compression, V.44 for a higher compression ratio, V.42, LAPM and MNP 2 to 4 error correction, V.90 up to 56 kbps, V.92 with quick-connect, MNP 10 for all line conditions and MNP 10EC for analog cellular environments.
Three LEDs report status: SP is on at high speed (V.56/V.90) and off at low speed (V.32/V.32b/V.34), CN is carrier detect and OH is off-hook status. A straight-through RJ-11-to-RJ-11 cable, not included, joins the card to a wall telephone outlet. The card connects only to intra-building or unexposed wiring, with the cable shield grounded at both ends, to meet the Telcordia GR-1089 NEBS standard.
Interface numbers follow (32 x slot number) + port number + 1: a card in slot 0 is interface 1, in slot 1 it is interface 33, in slot 2 it is interface 65 and in slot 3 it is interface 97. More WAN cards are in Cisco interface cards.
Related part: WIC-1AM Cisco 1-Port Analog Modem WAN Interface Card
| Part number | WIC-1AM-V2 |
| Type | 1-port analog modem WAN interface card (WIC) |
| Port | 1 x RJ-11 |
| Modem protocols | V.34bis (300 bps to 33.6 kbps), V.90 (up to 56 kbps), V.92 with quick-connect |
| Compression | V.42bis, MNP 5, V.44 |
| Error correction | V.42, LAPM, MNP 2 to 4, MNP 10, MNP 10EC |
| LEDs | SP, CN, OH |
| Cable | Straight-through RJ-11-to-RJ-11 (not included) |
| Modem firmware | Upgradable |
| Interface number | (32 x slot) + port + 1 |
| Sibling cards | WIC-1AM, WIC-2AM, WIC-2AM-V2 |
| Compatible with | Analog telephone lines through an RJ-11 wall outlet; Cisco access routers with WAN interface card slots |