Home / Shop
- Description
- Specifications
The WS-X4500-PS01 is the service access cover for the Cisco Catalyst 4500 series AC power shelf. It fits over the DC terminals on the power shelf, once the 2-m or 60-cm DC cable set links the ground and power terminals on the shelf to the DC input terminals on the switch.
Fitting the cover takes three moves. Insert the tabs on the cover into the slots to the left of the terminals, bend the cover around the terminal block with the corners poking through the slots, then insert the tabs on the front of the cover into the slots to the right of the terminals. Turn off the Catalyst 4500 series switch and unplug the AC power cords before taking the cover off or putting it back.
The shelf under the cover is the WS-P4502-1PSU, a Catalyst 4500 AC power shelf with a 2500 W power supply. It adds power for switching modules that feed inline devices such as IP phones, and it takes one or two 2500 W supplies, with PWR-4502 as the redundant supply. The Catalyst 4503-E chassis supports the WS-P4502-1PSU as its external AC power shelf.
Other Catalyst 4500 hardware, such as the WS-C4507R-E 7-slot chassis, is in the Cisco switches range.
| Part number | WS-X4500-PS01 |
| Type | Cisco Catalyst 4500 AC power shelf service access cover |
| Fits over | DC terminals on the power shelf |
| Power shelf | WS-P4502-1PSU, Catalyst 4500 AC power shelf with 2500 W power supply |
| Redundant power supply | PWR-4502, 2500 W |
| DC cable sets | CAB-4502-DC-2M (2 m) and a 60-cm set |
| Power supplies per shelf | One or two |
| Before removing the cover | Turn off the switch and unplug the AC power cords |
| Compatible with | Cisco Catalyst 4500 series switches fed by the WS-P4502-1PSU AC power shelf |