Home / Shop / Brocade


- Description
- Specifications
XBR-ACPWR-3000 is the Brocade 3000 W AC power supply FRU for the VDX 8770 data center switches. The same power supply part serves both the VDX 8770-4 and the VDX 8770-8 chassis. XBR-DCPWR-3000 is the 3000 W DC version.
The AC unit takes 200 to 240 VAC nominal (180 to 264 VAC range) at 50 or 60 Hz, with a maximum input current of 16 A. Input is protected on line and neutral by fuses, and inrush is 60 A peak for under 10 ms, then under 25 A from 10 to 150 ms and under 16 A beyond 150 ms. The chassis uses a C19 power inlet, with power entering from the port side.
The VDX 8770-4 takes up to four hot-swappable 3000 W supplies and the VDX 8770-8 up to eight. The 8770-4 ships with at least two supplies, with two more optional for redundancy, and the 8770-8 ships with at least three. Each supply is a separate AC feed, and each connection needs its own dedicated fused 200 to 240 VAC, 50 to 60 Hz circuit.
Three LEDs report supply health. AC OK is steady green when incoming AC is present, DC OK is steady green when the DC output is in range, and the ALM LED is steady amber when the supply has failed and should be replaced. The show environment power command reports each supply as OK, absent, unknown, predicting failure or faulty.
Related Brocade power and chassis parts are with the Brocade parts.
| Part number | XBR-ACPWR-3000 |
| Type | AC power supply FRU, hot-swappable |
| Output rating | 3000 W |
| Input voltage | 200 to 240 VAC nominal (180 to 264 VAC) |
| Input frequency | 50/60 Hz |
| Maximum input current | 16 A |
| Inrush | 60 A peak for under 10 ms |
| Chassis inlet | C19 |
| Compatible switches | VDX 8770-4, VDX 8770-8 |
| Supplies per chassis | up to 4 (8770-4), up to 8 (8770-8) |
| DC version | XBR-DCPWR-3000 |
