Home » Store » Brocade » Brocade Interface Card » Brocade CPX7 Control Processor Blade, XBR-CPX7-0103

Brocade CPX7 Control Processor Blade, XBR-CPX7-0103

Brocade CPX7 control processor blade for X7-8 and X7-4 Directors. Part number XBR-CPX7-0103.

Built for end users, business partners, government agencies, and contractors, we replace auction-site guesswork with direct human support. You get dedicated specialists who answer the phone, confirm exact compatibility, and deliver project-ready pricing built around your deployment timeline.

Home / Shop / Brocade

Brocade CPX7 Control Processor Blade, XBR-CPX7-0103
Brocade CPX7 Control Processor Blade, XBR-CPX7-0103
Brocade CPX7 Control Processor Blade, XBR-CPX7-0103

Home / Shop / Brocade

Brocade CPX7 Control Processor Blade, XBR-CPX7-0103

Model Number: XBR-CPX7-0103
Brocade CPX7 control processor blade for X7-8 and X7-4 Directors. Part number XBR-CPX7-0103.
Maximum quantity exceeded
Minimum purchase amount of 0 is required
Maximum purchase amount of 0 is allowed
Missing Inquiry Options
*Your Name:
*Your Email:
*Your Message:
Please send me a copy
0.000
Manufacturer: Brocade
Facebook
X
Email
LinkedIn
  • Description
  • Specifications

XBR-CPX7-0103 is the Brocade CPX7 control processor (CP) blade for the X7 Director, supported from Fabric OS 9.0.0. A sibling blade, CPX, is ordered as XBR-CPX-0103 and needs Fabric OS 9.1.0b. The X7-8 and X7-4 Directors use the same control processor blade, identified as either CPX7 or CPX.

A Director carries two CP blades in its half-height slots 1 and 2, which accept CP blades only. The blade in slot 1 is CP0 and the blade in slot 2 is CP1 in command line output. One active CP controls all ports, and the standby CP takes over if the active one fails. The configuration is mirrored to the standby blade and held in the WWN cards and the flash memory of the CP blades.

The faceplate has a blade status LED, a blade power LED, a chassis beacon LED and a blue Active CP LED, which marks the blade that is the active CP. On the CPX7 the MGMT Ethernet port runs at 1000 Mb/s, and the SERVICE Ethernet port is a 10/100/1000 Mb/s port. The serial console port sits on the faceplate of the active CP. CP blades can be hot-swapped one at a time or replaced by cold swap.

The Gen 6 counterpart is the CPX6 control processor blade.

Part numberXBR-CPX7-0103
BladeCPX7 control processor (CP)
ChassisBrocade X7-8 and X7-4 Director
Slots1 and 2 (CP0 and CP1)
Minimum Fabric OS9.0.0
Redundancyactive and standby CP
MGMT Ethernet port1000 Mb/s
SERVICE Ethernet port10/100/1000 Mb/s
Faceplate LEDsstatus, power, chassis beacon, active CP
Related bladeCPX (XBR-CPX-0103), Fabric OS 9.1.0b