Home / Shop
- Description
- Specifications
The XFP-10G-MM-SR is the Cisco 10GBASE-SR XFP module for multimode fiber. It works at a nominal 850 nm, with transmit and receive ranges of 840 to 860 nm, and it is for Ethernet applications only.
Link length depends on the fiber: 33 m on OM1, 82 m on OM2, 300 m on OM3 and 400 m on OM4. On standard FDDI-grade multimode fiber it supports a link length of 26 m. The connector is a dual LC/PC, and patch cords with APC connectors are not supported; PC or UPC patch cords are needed.
Power consumption is 1.5 W. Transmit power runs from -7.3 dBm minimum to -1.2 dBm maximum, and receive power from -9.9 dBm minimum to -1.0 dBm maximum. The commercial temperature range of 0 to 70 degrees C (32 to 158 degrees F) applies. The XFP family follows IEEE 802.3ae.
For other 10G optics, see the SFP-10G-ER 10GBASE-ER SFP+ module or the SFP-H10GB-CU3M 3 m Twinax cable. More optics are in Cisco interface cards.
| Part number | XFP-10G-MM-SR |
| Type | 10GBASE-SR XFP module for multimode fiber |
| Wavelength | 850 nm nominal (840-860 nm) |
| Reach | OM1 33 m; OM2 82 m; OM3 300 m; OM4 400 m; FDDI-grade 26 m |
| Connector | dual LC/PC (APC patch cords not supported) |
| Power consumption | 1.5 W |
| Transmit power | -7.3 dBm minimum, -1.2 dBm maximum |
| Receive power | -9.9 dBm minimum, -1.0 dBm maximum |
| Temperature range | commercial, 0 to 70 C (32 to 158 F) |
| Standard | IEEE 802.3ae |
| Compatible with | Cisco 10 Gigabit Ethernet XFP ports |