Home / Shop
- Description
- Specifications
A6837B is the HP Integrity rx5670 server with one 1.3 GHz Itanium 2 processor, which carries 3 MB of level 3 cache and 256 KB of level 2 cache. The rx5670 is a symmetrical multiprocessing server that supports one to four Itanium 2 processors. They can be installed one at a time in the sequence 0, 1, 2, 3. The 1.3 GHz and 1.5 GHz processors cannot be mixed in the same system.
Memory is PC2100 ECC registered DDR266A SDRAM with chip spare protection, installed four DIMMs at a time. The minimum is 1 GB as four 256 MB DIMMs, and the server takes up to two 24-slot memory carrier boards, 48 DIMM slots in all, for a maximum of 96 GB. Each carrier board has its own 6.4 GB/s memory bus.
Ten PCI-X and PCI slots are available: three 133 MHz 64-bit slots on dedicated PCI-X buses, six 66 MHz 64-bit slots on three PCI-X buses, and one 33 MHz 32-bit PCI slot. Two Ultra160 LVD SCSI controllers serve up to four internal hot plug disks, 438 GB at most, and the server includes a 10/100/1000Base-TX LAN port and a management processor. HP-UX 11i version 2, Windows Advanced Server and Linux are supported. Two power supplies are included, and a third adds N+1 protection.
| Designation | HP Integrity rx5670 server with one 1.3 GHz processor |
| Processor | 1 x 1.3 GHz Intel Itanium 2 |
| Level 3 cache | 3 MB |
| Level 2 / level 1 cache | 256 KB / 32 KB |
| Processors supported | 1 to 4 |
| Memory | 1 GB minimum, 96 GB maximum |
| DIMM slots | 48 (two 24-slot carrier boards) |
| PCI-X and PCI slots | 10 |
| Internal disks | up to 4, maximum 438 GB |
| Integrated LAN | 10/100/1000Base-TX |
| Power supplies | 2 included, 3rd for N+1 |
| Operating systems | HP-UX 11i version 2, Windows Advanced Server, Linux |
| Other rx5670 server number | A6838B |

