The HP Integrity rx5670 is a 7U rack server (12.25 in, 7 EIA units; a slider rail adds one unit and brings a slider-mounted rx5670 to eight) that holds one to four 64-bit Itanium 2 processors. The A6837B base carries one 1.3 GHz processor with 3 MB of cache and the A6838B base one 1.5 GHz processor with 6 MB. Processors go in one at a time in the order 0, 1, 2, 3, and 1.3 GHz and 1.5 GHz parts cannot be mixed in one system. It runs HP-UX 11i version 2, Windows and Linux, and it can stand on the floor in the desk side mount A5525A when no rack is wanted.
Memory sits on up to two 24-slot carrier boards, 48 DIMMs in all, using ECC registered PC2100 DDR266A modules with chip spare protection. DIMMs are installed in quads of equal density: 1 GB (4 x 256 MB), 2 GB, 4 GB or 8 GB (4 x 2 GB), with a 1 GB minimum and a 96 GB maximum for HP-UX 11i v2 and Linux. Windows Server 2003 is held to 64 GB. Load the quads in the order marked on the carrier, put the largest quads in the lowest-numbered slots, and when both carriers are fitted alternate quads between them; each carrier has its own 6.4 GB/s memory bus.
The backplane has twelve slots, of which ten take PCI-X or PCI adapter cards. Slots 10, 11 and 12 each have a dedicated 64-bit 133 MHz PCI-X bus and a separate 0.5 GB/s channel, which is where the busiest cards go. Slots 4 to 9 share three 66 MHz buses, two slots per bus, and one 33 MHz slot is recommended for a graphics card. Every slot is keyed 3.3 V and 5 V cards are not supported. The core I/O brings a 10/100/1000Base-T LAN port, an external Ultra160 SCSI port, and a management processor with its own 10/100 LAN port and three RS-232 ports multiplexed from one DB-25 connector. The adapter range runs from Ultra160 and Ultra320 SCSI and Smart Array 5302, 5304, 6402 and 6404 controllers to 2 Gb/s Fibre Channel, gigabit Ethernet, FDDI, token ring, ATM and X.25 cards.
Up to four low profile or half height hot-plug Ultra160 SCSI disks fit in the chassis, two per SCSI controller, with 36 GB 15K, 73 GB 15K and 146 GB 10K drives supported, plus one DVD-ROM or DDS-3 drive. On Windows and Linux the Smart Array 5302 and 5304 controllers reach the internal disks through the A9828A cables. Two hot-swap power supplies are fitted as standard and a third adds N+1 protection, each with its own AC receptacle, on 100 to 240 V input. Typical maximum dissipation is 952 W and the theoretical maximum is 2,089 W. For cabinet installs, the A4900A, A4901A and A4902A options cover three, four and five rx5670 servers in one HP cabinet, with A5580A for static rails or A5581A for slider rails at the factory.
We accept purchase orders with Net 30 terms and return quotes the same day, typically within 15 minutes. Scroll down for a full parts list.
Request a quote or send us your parts list.
Looking for a specific HP Integrity rx5670 part?
Send us the part number and quantity. Quotes reflect real-time availability and part condition. A product specialist reviews each request and replies, typically within minutes during business hours.
Prefer to call? (231) 287-5244
No obligation. No spam. We never sell or share your information. Privacy statement
rx5670 parts we supply
I/O (33)
| Option number | Description | Part page |
| A6795A | PCI 2 Gb/s Fibre Channel | View part |
| A6828A | PCI 1 channel U160 SCSI | View part |
| A6829A | PCI 2 channel U160 SCSI | View part |
| A7059A | PCI Windows and Linux Ultra160 SCSI | View part |
| A7060A | PCI Windows Linux 2 port Ultra160 SCSI | View part |
| A7173A | PCI 2 channel Ultra320 SCSI | View part |
| A9825A | 2 channel Smart Array 5302 / 128 MB | View part |
| A9826A | 4 channel Smart Array 5304 / 256 MB | View part |
| A9890A | PCI-X 2 channel Smart Array 6402 U320 | View part |
| A9891A | PCI-X 2 channel Smart Array 6404 256 MB | View part |
| AB232A | PCI X 2 Gb/s Fibre Channel | View part |
| AB234A | 2 Gb/s Fibre Channel | View part |
| A6826A | PCI X 2 channel 2 Gb/s Fibre Channel | View part |
| A5149A | PCI 1 port Ultra SCSI | View part |
| A5150A | PCI 2 port Ultra SCSI | View part |
| A6825A | PCI 1 port 1000Base-T (gigabit copper) | View part |
| A6847A | PCI 1 port 1000Base-SX (gigabit fiber) | View part |
| A5230A | PCI 1 port 10/100Base-TX | View part |
| A5506B | PCI 4 port 100Base-TX | View part |
| A5783A | PCI 1 port 802.5 Token Ring 4/16/100 | View part |
| A3739B | PCI 1 port Universal FDDI LAN | View part |
| A7061A | PCI 1 port 1000Base-T | View part |
| A7073A | PCI 1 port 1000Base-SX | View part |
| AB286A | PCI-X 2 port 4x Fabric (HPC) Adapter | View part |
| A5838A | PCI 2 port 100Base T/ 2 port Ultra2 SCSI | View part |
| A9782A | PCI-X 2Gb Fibre Channel / 1000BaseSX | View part |
| A9784A | PCI-X 2Gb Fibre Channel / 1000BaseTX | View part |
| A5513A | PCI 1-port ATM 155 Mbps (MMF) | View part |
| J3525A | 2 port Programmable Serial Interface (PSI) X.25 / Frame Relay / SDLC | View part |
| A6869A | Graphics / USB Card | View part |
| A3593A | PCI 64-port Terminal Multiplexer | View part |
| A3592A | PCI 8-port Terminal Multiplexer | View part |
| A6386A | PCI HyperFabric 2 Fibre | View part |
Rack, cables and other (8)
| Option number | Description | Part page |
| A5525A | Standalone/desk side mount, for use when a rack is not required | View part |
| A5540A | Bolt on anti tip feet, required when racking an HP Integrity rx5670 on a slider | View part |
| A4900A | Quantity 3 HP Integrity rx5670 in one HP cabinet (with or without slider rails) | View part |
| A4901A | Quantity 4 HP Integrity rx5670 in one HP cabinet (with or without slider rails) | View part |
| A4902A | Quantity 5 HP Integrity rx5670 in one HP cabinet (with or without slider rails) | View part |
| A5580A | Factory racking with static rails | View part |
| A5581A | Factory racking with slider rails | View part |
| A9828A | Internal Smart Array cables to connect a Smart Array card to the internal drives | View part |
Base systems (2)
| Option number | Description | Part page |
| A6837B | Server and one 1.3 GHz processor | View part |
| A6838B | Server and one 1.5 GHz processor | View part |