Home / Shop / IBM


- Description
- Specifications
Feature 5761 is the tape-controller version of IBM's 4 Gb Single-Port Fibre Channel PCI-X 2.0 DDR adapter, CCIN 280D. It is a 64-bit, short-form-factor PCI-X card with one LC fibre connector, and it auto-negotiates 1, 2 or 4 Gbps with whatever it is attached to. IBM gives its field-replaceable unit as 046K6838 and the wrap plug as 012R9314. The disk-controller personality of the same hardware is feature 5760, CCIN 280E.
The slot requirement is one free 3.3 V PCI or PCI-X slot, on a PCI-X 2.0a bus. On 50/125 micron fibre IBM rates 500 m at 1 Gbps, 300 m at 2 Gbps and 150 m at 4 Gbps; on 62.5/125 micron fibre the figures are 300 m, 150 m and 70 m. Against switches with long-wave optics, runs of up to 10 km are possible at any of the three speeds. For a device or switch with SC fibre connectors, IBM calls for an LC-SC converter cable, feature 2456 for 50 micron or 2459 for 62.5 micron.
On IBM i, IBM's placement rules say the 5761 supports up to 16 Fibre Channel attached tape devices, counting both media changers and tape drives. It supports the alternate installation function but not alternate IPL.
Another Fibre Channel option on the site is the feature 5735 adapter. Tape and Storwize parts are on the IBM tape and Storwize parts page.
| FC 5761 Specs | |
| Feature code | 5761 |
| Name | PCI-X Fibre Channel tape controller (4 Gb single-port PCI-X 2.0 DDR) |
| CCIN | 280D |
| FRU | 046K6838 |
| Wrap plug FRU | 012R9314 |
| Connector | one LC |
| Link speeds | 1, 2, 4 Gbps |
| Bus | PCI-X 2.0a, 64-bit, short |
| Slot | one 3.3 V PCI or PCI-X |
| Disk-controller version | feature 5760 (CCIN 280E) |
