Home / Shop


- Description
- Specifications
4XC7A76498 is the ThinkSystem Emulex LPe35000 32Gb 1-port PCIe Fibre Channel Adapter v2, Lenovo feature code BJ3G. It is a Gen 7 Fibre Channel host bus adapter by Broadcom, based on the single-port Emulex LPe35000 with the Emulex Engine 601 (XE601) I/O controller. The v2 adapter has the same features and functions as the original 1-port adapter 4XC7A08250 (feature B5SX); the only difference is which servers and operating systems Lenovo supports.
The host interface is PCIe 4.0 x8 and is compatible with PCIe 3.0. The single SFP+ port negotiates 32, 16 and 8 Gb Fibre Channel link speeds automatically, at 3200, 1600 and 800 MBps full duplex. A 32 Gb short-wave SFP+ optic (850 nm, LC connector) comes installed, and other transceivers are not supported. Over 50/125 micron OM3 fiber the optic reaches 70 m at 32 Gbps and 100 m at 16 Gbps, and over OM4 it reaches 100 m at 32 Gbps.
The adapter supports up to 5,000,000 IOPS, N_Port ID Virtualization (NPIV), FC-NVMe, and point-to-point and switched fabric topologies. The optics are hot-swappable, so one can be replaced without shutting the system down, and Silicon Root of Trust security verifies the firmware digital signature each time the system boots. The card is a low-profile board of 168 mm x 69 mm, with a 3U standard bracket attached and a 2U low-profile bracket in the box. The 2-port version is 4XC7A76525.
| Part number | 4XC7A76498 |
| Feature code | BJ3G |
| Ports | 1 x 32Gb Fibre Channel SFP+ |
| Host interface | PCIe 4.0 x8 (PCIe 3.0 compatible) |
| Link speeds | 32 / 16 / 8 Gb, auto-negotiated |
| Maximum IOPS | 5,000,000 |
| I/O controller | Emulex Engine 601 (XE601) |
| Optic included | 32Gb SW SFP+, 850 nm, LC |
| Form factor | low profile, 168 mm x 69 mm |
| Brackets | 3U attached, 2U included |
| Related part numbers | 4XC7A08250 (original 1-port adapter, B5SX) |
