Home / Shop
- Description
- Specifications
Four small form factor bays are what set the 722315-B21 apart: it is the HP ProLiant DL320e Gen8 v2 Hot Plug 4 SFF configure-to-order server, a 1U rack server with a 4 SFF hot plug drive cage, an HPE Ethernet 1Gb 2-port NC332i adapter, HPE iLO Management Engine and an HPE Dynamic Smart Array B120i SATA controller (RAID 0/1/10).
Maximum hot plug capacity in the 4 SFF cage is 4.8TB of SAS (4 x 1.2TB), 4.0TB of SATA (4 x 1TB), and 3.2TB of SAS or SATA SSD (4 x 800GB). With more than two drives installed in the 4 SFF cage the B120i runs at 3Gb/s, and 6Gb/s needs a stand-up Smart Array controller. Mixing standard SAS drives with SAS SSDs is supported but limits the RAID setup to two separate RAID 0 volumes.
Power is the other point to check. The default supply is a 250W non hot plug, non redundant ATX unit, and the 750W Common Slot -48VDC supply (636673-B21), which supports NEBS compliance, is available only for the 4 SFF configuration and needs the DL320e Gen8 v2 CS FIO Enablement Kit. The 4 SFF chassis weighs up to 8.0 kg (17.64 lb), and the case is 1.7 in (4.32 cm) high and 17.11 in (43.46 cm) wide.
Single-processor options run from Pentium G3000 and Core i3-4000 to Xeon E3-1200 v3, with four unbuffered DIMM slots. Small form factor blanks are the 666987-B21 SFF hard drive blank kit, and the server cannot be converted between SFF and LFF cages. Other rack servers are in HPE server systems.
| Part number | 722315-B21 |
| Name | HPE ProLiant DL320e Gen8 v2 Hot Plug 4 SFF Configure-to-order Server |
| Form factor | 1U rack |
| Drive cage | 4 SFF hot plug |
| Storage controller | HPE Dynamic Smart Array B120i SATA (RAID 0/1/10) |
| Network | HPE Ethernet 1Gb 2-port NC332i adapter |
| Processors | Intel Pentium G3000, Core i3-4000 and Xeon E3-1200 v3 families |
| Memory | 4 unbuffered ECC DIMM slots, 32GB maximum (4 x 8GB at 1600MHz) |
| Maximum internal storage | Hot Plug SFF SAS 4.8TB (4 x 1.2TB); SFF SATA 4.0TB (4 x 1TB); SFF SAS or SATA SSD 3.2TB (4 x 800GB) |
| Power supply | default 250W non hot plug; 750W -48VDC Common Slot (636673-B21) for 4 SFF only |
| Weight | up to 8.0 kg (17.64 lb) for 4 SFF maximum configuration |
| Dimensions | height 1.7 in (4.32 cm), width 17.11 in (43.46 cm) |
| Compatible with | Intel Pentium G3000, Core i3-4000 and Xeon E3-1200 v3 processors; HPE SmartMemory unbuffered DIMMs; 666987-B21 SFF drive blank kit; 636673-B21 750W DC power supply |