Home / Shop
- Description
- Specifications
A6912A is the base system of the HP 9000 rp8420 server, a symmetrical multiprocessing server that supports up to 16 dual core PA-8900 processor modules, which makes a 32 core server. It is built around the sx1000 chip set and runs 64-bit HP-UX 11i v1, 11i v2 and 11i v3.
Processors sit on cell boards: one to four cells go into the server, and each cell board has four processor module slots for up to eight cores, 16 memory DIMM slots and an sx1000 cell controller. Cell slots 0 or 1 are loaded first, and the recommended loading order is 0, 1, 2, 3. The PA-8900 modules run at 1.1 GHz or 1.0 GHz with 64 MB of level 2 cache and 3 MB of level 1 cache (1.5 MB per core). PA-8800 modules at 1.0 GHz and 900 MHz are also supported, and PA-8800 and PA-8900 can share a chassis only in different hardware partitions. The cell board can be carried forward to the HP Integrity rx8620.
Memory is 64 DIMM slots in total, 16 per cell board, with a 2 GB minimum (one quad of four DIMMs) and a 256 GB maximum, or 64 GB per cell board. Internal storage is up to four hot plug LVD SCSI disks for 1.2 TB, plus two removable media slots that take DVD+RW and an optional 40 GB DDS-4 DAT drive.
Sixteen hot plug PCI-X slots run at 133 MHz and 64 bits: fourteen dual channel slots at 1060 MB/s each and two single channel slots at 530 MB/s each. The core I/O board brings Ultra3 SCSI-LVD, a 10/100/1000Base-T port with an RJ-45 connector, two RS-232 serial ports (one console, one UPS) and a 10/100Base-T port for web and LAN console. A Server Expansion Unit raises the limits to four core I/O boards, eight internal disks and 32 PCI cards.
Up to six hot swap power supplies can be fitted, on 200-240V at 50/60 Hz with two line cords required and four cords for 2N power. Typical maximum power dissipation is 3560 VA (3489 W). The racked server is 30 in deep, 19 in wide and 29.75 in high (17 EIA units), weighs 378 lb (171.4 kg), and a pedestal configuration is 32.8 in high.
| Designation | HP 9000 rp8420 server base system |
| Chip set | sx1000 |
| Processors supported | dual core PA-8900 1.1 GHz or 1.0 GHz |
| Processor cache | 64 MB level 2, 3 MB level 1 |
| Maximum processors | 16 dual core modules, 32 cores |
| Cell boards | 1 to 4 |
| Memory | 2 GB minimum, 256 GB maximum, 64 DIMM slots |
| Internal disks | up to 4, maximum 1.2 TB |
| Removable media | 2 slots, DVD+RW, optional DDS-4 DAT |
| PCI-X slots | 16 hot plug (133 MHz, 64-bit) |
| Typical maximum power dissipation | 3560 VA (3489 W) |
| Weight | 378 lb (171.4 kg) |
| Rack size | 30 in deep, 19 in wide, 29.75 in high |

