Home / Shop
- Description
- Specifications
A9958A is the base system of the HP 9000 rp8440 server, a symmetrical multiprocessing server for up to 16 dual core HP PA-RISC PA-8900 processors at 1.068 GHz with 64 MB of cache, which is 2 to 32 processor cores. It is based on the sx2000 chip set, and it can be set up as one SMP server or divided into hardware partitions. HP-UX 11i v1, 11i v2 and 11i v3 are supported.
One to four cell boards go into the rp8440, ordered individually, with cell slots 0 or 1 loaded first and the recommended order 0, 1, 2, 3. Each cell board has four processor slots for up to eight cores, 16 DDR II memory DIMM slots, an sx2000 cell controller and DC-DC power converters, and each cell can also be set up in combination with Instant Capacity processors. Every active cell board needs at least one active core. The PA-8900 has 64 MB of level 2 cache, 3 MB of level 1 cache and 44-bit physical addressing, and it is installed in the order 0, 2, 1, 3 on each cell board. The rp8440 cell board is the same board used in the rp7440 and can be carried forward to the rx7640 and rx8640.
Memory is 64 DIMM slots, 16 per cell board, installed in pairs of equal density, with a 2 GB minimum per cell and 17 GB/s of peak memory bandwidth per cell board. Up to four internal hot plug LVD SCSI disks provide 1.2 TB, or 2.4 TB with eight mechanisms in a Server Expansion Unit 2, and there are two internal removable media slots for DVD+RW or a 72 GB DAT drive.
Sixteen hot plug PCI-X slots run at up to 266 MHz and 64 bits, and the Server Expansion Unit 2 doubles the maximums to 32 slots. Core I/O has an Ultra320 SCSI-LVD port, a 1 GbE RJ-45 port, one RS-232 console port and a 100Base-T LAN console port. Six hot swap power supplies are the maximum, on 200-240V at 50/60 Hz. The racked server is 30 in deep, 19 in wide and 29.75 in high (17 EIA units), and it weighs 378 lb (171.4 kg).
| Designation | HP 9000 rp8440 server base system |
| Chip set | sx2000 |
| Processors supported | dual core HP PA-8900, 1.068 GHz, 64 MB cache |
| Processor cores | 2 to 32 |
| Cell boards | 1 to 4 |
| Memory | 2 GB minimum per cell, 64 DIMM slots |
| Internal disks | up to 4, maximum 1.2 TB (2.4 TB with 8 mechanisms in SEU 2) |
| Removable media | 2 slots, DVD+RW or DAT 72 |
| PCI-X slots | 16 hot plug (266 MHz, 64-bit) |
| Core I/O | Ultra320 SCSI-LVD, 1 GbE, RS-232, 100Base-T |
| Weight | 378 lb (171.4 kg) |
| Rack size | 29.75 in high (17 units), 19 in wide, 30 in deep |

