Home / Shop
- Description
- Specifications
A9827A is the HP Smart Array internal cable option kit for connecting a server's internal disks to a Smart Array RAID card. On the HP Integrity rx2600 the kit supplies two cable assemblies: A7231-63024 is the single-port cable at 49 cm (19 in.) and A7231-63025 is the dual-port cable at 58 cm (23 in.). Additional cables are ordered by the option kit number A9827A.
To fit the cables, the SCSI cables that join the internal disks to the built-in SCSI controller come off and the new cables run from the disks to the Smart Array card, for example the Smart Array 6402 controller (A9890A) installed in a full-length PCI slot. Drives that share an array should all have the same capacity.
On the rx2600 and the HP Integrity rx2620, internal RAID 1 takes two identical hard disks and A9827A, RAID 1 with a hot spare takes three identical disks and A9827A, and RAID 5 takes three identical disks and A9827A. The rx2600 factory does not load the operating system in a RAID configuration, so the operating system is reloaded when internal RAID is wanted.
On the HP 9000 rp3440 with PA-8900 processors, an optional Smart Array 6404/256MB controller adds internal RAID 1; that takes a matched pair of hard disks and A9827A.
| Designation | A9827A |
| Manufacturer | HPE |
| Type | Smart Array internal SCSI cable option kit |
| rx2600 single-port cable | 49 cm / 19 in. (A7231-63024) |
| rx2600 dual-port cable | 58 cm / 23 in. (A7231-63025) |
| Used with | Smart Array 6402 controller (A9890A) |
| Servers | rx2600, rx2620, rp3440 (PA-8900) |
| Internal RAID 1 | 2 identical disks |
| Internal RAID 1 + hot spare, RAID 5 | 3 identical disks |

