Home » Store » HPE » HP-UX Parts » C7497C HP StorageWorks DAT 40 Array Module

C7497C HP StorageWorks DAT 40 Array Module

C7497C is the HP StorageWorks DAT 40 array module, the DDS-4/DAT40 drive in the Superdome DVD solution.

Built for end users, business partners, government agencies, and contractors, we replace auction-site guesswork with direct human support. You get dedicated specialists who answer the phone, confirm exact compatibility, and deliver project-ready pricing built around your deployment timeline.

Home / Shop

C7497C HP StorageWorks DAT 40 Array Module
C7497C HP StorageWorks DAT 40 Array Module
C7497C HP StorageWorks DAT 40 Array Module

Home / Shop

C7497C HP StorageWorks DAT 40 Array Module

Model Number: C7497C
C7497C is the HP StorageWorks DAT 40 array module, the DDS-4/DAT40 drive in the Superdome DVD solution.
Maximum quantity exceeded
Minimum purchase amount of 0 is required
Maximum purchase amount of 0 is allowed
Missing Inquiry Options
*Your Name:
*Your Email:
*Your Message:
Please send me a copy
0.000
Categories: HP-UX Parts
Manufacturer: HPE
Facebook
X
Email
LinkedIn
  • Description
  • Specifications

C7497C is the HP StorageWorks DAT 40 Array Module, the DDS-4/DAT40 drive in the DVD solution for the HP Integrity Superdome sx1000 and sx2000, with one drive per partition. DDS-5/DAT 72 is also supported there, as the Q1524B. A 10.5-meter HD HDTS68 cable is required whenever a DDS-4 or DDS-5 drive is used. The same solution takes the C2361B 1-meter multi-mode VH-HD68 SCSI cable, the C2364A SCSI terminator and, as an option, the C2978B jumper SCSI cable for DDS-4.

A September 2007 firmware release brought the DAT 40 SCSI drives, C7497C included, to version YP76 for enhanced reliability. It fixed a rare 0xE7 error (unable to locate target) when writing to a newly formatted tape, a rare DCLZ or 0x4E (unknown codeword) error on an overwrite, a rare load, format or unload failure on a new cartridge, and a rare 0xCC error (end of media encountered) with an ASCQ of 0x0002 on a two-partition format.

HP StorageWorks parallel SCSI DAT products, C7497C among them, were not designed to work connected to two hosts. Multi-initiator, cluster and high availability configurations are not supported, and a standalone or autoloader setup with two hosts is not supported either; bus resets sent from the second host can interrupt operations from the first.

DesignationC7497C
ManufacturerHPE
TypeDAT 40 (DDS-4) array module
Interfaceparallel SCSI
Superdome DVD solutionone per partition
DDS-5/DAT 72 alternativeQ1524B
Cable required10.5-meter HD HDTS68
TerminatorC2364A
Firmware (Sept 2007 release)YP76
Hosts per driveone