Home / Shop


- Description
- Specifications
AB467A is an HP StorageWorks 2 Gb, 64-bit/133 MHz PCI-X to Fibre Channel host bus adapter for Windows Server 2003 on Itanium servers. The spare numbers are A7388A and 366027-001. Support for fibre cabling comes from an embedded small form factor LC optical interface using a short-wave laser, so the cable is multimode fibre with an LC connector.
AB467A has to sit in a 64-bit/133 MHz PCI-X universal slot. A 2 Gbps Fibre Channel link carries up to 400 MBps in both directions at once. Features include full fabric boot to multiple LUNs, FC-Tape (FC-2) devices, point-to-point, arbitrated-loop and switch fabric attachment, Fibre Channel classes 2 and 3, automatic speed negotiation and end-to-end parity protection. The ANSI Fibre Channel and PCI Local Bus standards both apply.
Each card ships with a unique identifier stored in flash memory, from which the WorldWide Port Name and Node Name are derived; the combined 8-byte WWN and the serial number are marked on the card. The software runs under Windows Server 2003 Enterprise Edition and Datacenter Edition, with the Windows SCSI Miniport driver, POST and Event Viewer logging, and the LightPulse utility for firmware. The HP Integrity rx1620 and rx4640 are among the servers that take it.
| Designation | AB467A |
| Manufacturer | HPE |
| Type | Fibre Channel host bus adapter, HP StorageWorks |
| Speed | 2 Gbps, up to 400 MBps full duplex |
| Bus | 64-bit PCI-X, 133 MHz |
| Connector | LC, short-wave multimode |
| Operating system | Windows Server 2003, 64-bit |
| Spares | A7388A, 366027-001 |
| Boot | full fabric boot to multiple LUNs |
| Fibre Channel classes | 2 and 3 |
