Home / Shop
- Description
- Specifications
A 2 x 2 patch array brings the AIR-ANT5195P-R, a Cisco Aironet 5-GHz patch antenna, a peak gain of 9.5 dBi from 5150 to 5850 MHz at a nominal 50 ohms. Polarization is linear and vertical, beamwidth is 43 degrees in the E-plane and 50 degrees in the H-plane, sidelobes are below -20 dBc and front-to-back ratio is above 20 dB.
The body is 5.1 in. (12.9 cm) square and 1.0 in. (2.5 cm) high. A 36 in. (91.4 cm) plenum-rated, UV-stable cable ends in an RP-TNC plug, and the antenna is for indoor or outdoor use. The back carries an orientation marking, and a wrong position degrades performance.
The antenna goes on any flat vertical surface, or on a mast with an optional mast mounting kit; an articulated mast kit is also available. Included are four #8 x 1-3/4 in. sheet metal screws, four screw caps and four screw cap washers, with a drill, a #2 Phillips screwdriver and a mallet needed for drywall.
Cisco Aironet access points and bridges are the usual partners, along with any 5-GHz Cisco Aironet radio device that has an RP-TNC connector. Find more antennas in Cisco wireless.
| Part number | AIR-ANT5195P-R |
| Antenna type | 2 x 2 patch array |
| Frequency range | 5150-5850 MHz |
| Peak gain | 9.5 dBi |
| Nominal input impedance | 50 ohms |
| Polarization | Linear, vertical |
| Beamwidth (3-dB) | E-plane 43 degrees, H-plane 50 degrees |
| Sidelobe level | Below -20 dBc |
| Front-to-back ratio | Above 20 dB |
| Cable | 36 in. (91.4 cm), plenum rated, UV stable |
| Connector | RP-TNC plug |
| Dimensions (L x W x H) | 5.1 x 5.1 x 1.0 in. (12.9 x 12.9 x 2.5 cm) |
| Mounting | Flat vertical surface or mast (optional kit); screws, caps and washers included |
| Environment | Indoor and outdoor |
| Compatible with | Cisco Aironet access points and bridges and 5 GHz Cisco Aironet radio devices with RP-TNC connectors |