Home / Shop
- Description
- Specifications
Large rooms and vaulted areas that need extended coverage are the setting for the AIR-ANT5160V-R, a ruggedized Cisco Aironet 6-dBi omnidirectional colinear array for the 5-GHz band. It works indoors or outdoors and mounts on a mast, an I-beam or a suspended ceiling cross member.
Peak gain is 6 dBi from 5150 to 5875 MHz at a nominal 50 ohms, with a 17-degree E-plane beamwidth, an omnidirectional H-plane pattern and linear polarization. The antenna is 11.5 in. (29.2 cm) long and 1 in. (2.5 cm) in diameter, weighs 12 oz. (0.34 kg), and has a 36 in. (91.4 cm) plenum-rated cable ending in an RP-TNC plug.
The mounting kit holds a T-rail grid bracket, a bracket plate, an I-beam clamp, a U-bolt, a V-bracket and two base brackets. On a T-rail grid the cable can point up or down. Outdoors, the cable must point down to let moisture drain through the drain holes, and the antenna is grounded.
RP-TNC jacks on 5-GHz Cisco Aironet radio devices, including Cisco access points and bridges, mate with the plug. Keep the antenna away from heating ducts, large ceiling trusses and major power cable runs. More mounting hardware and antennas are in Cisco wireless.
| Part number | AIR-ANT5160V-R |
| Antenna type | Omnidirectional colinear array |
| Frequency range | 5150-5875 MHz |
| Peak gain | 6 dBi |
| Nominal input impedance | 50 ohms |
| Polarization | Linear |
| Beamwidth (3-dB) | E-plane 17 degrees, H-plane omnidirectional |
| Cable | 36 in. (91.4 cm), plenum rated |
| Connector | RP-TNC plug |
| Length | 11.5 in. (29.2 cm) |
| Diameter | 1 in. (2.5 cm) |
| Weight | 12 oz. (0.34 kg) |
| Mounting | Suspended ceiling T-rail, I-beam, or pole (mast); kit included |
| Environment | Indoor and outdoor |
| Compatible with | Cisco Aironet access points and bridges and 5 GHz Cisco Aironet radio devices with RP-TNC connectors |