Home / Shop
- Description
- Specifications
No cable is attached to the AIR-ANT2450V-N: this Cisco Aironet 5-dBi omnidirectional antenna plugs straight into an antenna port on the access point through its N-male connector. It is a 2.4-GHz colinear array, 11.0 in. (27.9 cm) long, with linear vertical polarization, a 30-degree elevation beamwidth and an omnidirectional azimuth pattern.
The frequency range is 2400 to 2484 MHz, VSWR is 1.7:1 and nominal input impedance is 50 ohms. The wind rating is 125 mph (201 km/h), with gusts to 165 mph (265 km/h). Six drain holes sit in the antenna base, and waterproofing materials are not recommended, as they can block those holes. Hand tight is enough, and a 3/4 in. (19 mm) wrench may be needed to remove the port covers. The access point should sit clear of obstructions at the sides of the radiating element.
The antenna is for the Cisco Aironet 1520 Series Outdoor Mesh Access Point and is compatible with the 1505 and 1510 Outdoor Mesh Access Points, and it is also used on 1560 and 1570 Series mesh access points. Browse other outdoor antennas in Cisco wireless.
| Part number | AIR-ANT2450V-N |
| Antenna type | Omnidirectional colinear array |
| Frequency range | 2400-2484 MHz |
| Gain | 5 dBi |
| Nominal input impedance | 50 ohms |
| VSWR | 1.7:1 |
| Polarization | Linear, vertical |
| Beamwidth (3-dB) | Omnidirectional azimuth, 30 degrees elevation |
| Length | 11.0 in. (27.9 cm) |
| Connector | N-male |
| Mounting | Direct mount, no cable |
| Wind rating | 125 mph (201 km/h), gusts 165 mph (265 km/h) |
| Environment | Outdoor |
| Compatible with | Cisco Aironet 1520 Series Outdoor Mesh Access Point, 1505 and 1510 Outdoor Mesh Access Points, 1560 and 1570 Series mesh access points |