Home / Shop
- Description
- Specifications
A 90-degree sector pattern with 14 dBi of gain defines the AIR-ANT2414S-R, a Cisco Aironet vertically polarized outdoor antenna for 2.4-GHz bridging links. Elevation beamwidth is 8.5 degrees across 2400 to 2500 MHz at a nominal 50 ohms, and the gain figure includes the 1.5 m cable.
The panel measures 35.9 in. (91.2 cm) long, 6.4 in. (16.3 cm) wide and 4.03 in. (10.23 cm) deep, and weighs 7.5 lb (3.4 kg) with its hardware kit. Wind rating is 100 mph (161 km/h). A 5 ft (1.5 m) LMR-195 coaxial lead ends in an RP-TNC male plug. The kit clamps to masts from 1.5 in. (3.8 cm) to 2.5 in. (6.3 cm) in diameter, using an adjustable upper bracket, a fixed lower bracket and hex bolts in two lengths. On a flat vertical surface, elevation can be adjusted but azimuth stays fixed, and the surface itself must face the other end of the link.
The antenna pairs with Cisco Aironet access points and bridges and any 2.4-GHz Cisco Aironet radio device that has an RP-TNC connector. On a Cisco Aironet 1300 Series Wireless Bridge it must be professionally installed. Mount it with the orientation arrow pointing up and clear of obstructions at the sides. Further antennas are in Cisco wireless.
| Part number | AIR-ANT2414S-R |
| Antenna type | 90-degree sector |
| Frequency range | 2400-2500 MHz |
| Gain | 14 dBi (including 1.5 m cable) |
| Nominal input impedance | 50 ohms |
| Polarization | Linear, vertical |
| Beamwidth (3-dB) | 90 degrees azimuth, 8.5 degrees elevation |
| Cable | 5 ft (1.5 m) LMR-195 coaxial |
| Connector | RP-TNC male |
| Dimensions (L x W x D) | 35.9 x 6.4 x 4.03 in. (91.2 x 16.3 x 10.23 cm) |
| Weight with hardware kit | 7.5 lb (3.4 kg) |
| Wind rating | 100 mph (161 km/h) |
| Environment | Outdoor |
| Mast diameter | 1.5 to 2.5 in. (3.8 to 6.3 cm) |
| Compatible with | Cisco Aironet access points and bridges and any 2.4 GHz Cisco Aironet radio device with an RP-TNC connector |