Home / Shop
- Description
- Specifications
A female N connector and a 2 x 2 patch array mark the AIR-ANT5114P-N, a Cisco Aironet 5-GHz patch antenna with gain of 14 dBi from 5470 to 5850 MHz. Azimuth half-power beamwidth is 29 degrees, elevation beamwidth is 25 degrees, polarization is linear vertical and front-to-back ratio is 20 dB.
A separate low-loss cable connects the antenna to the access point. The articulating mount is included, with azimuth and elevation adjustment bolts that tighten once the antenna is aimed, and it fits mast poles up to 2 in. in diameter. For a wall, the kit holds four #8 x 3/4 in. screws, four #8 wall anchors and a wall mount plate, and all four screws must be used; a flat surface or a pole both work.
The antenna works with Cisco Aironet access points and bridges, including outdoor access points, and with any 5-GHz Cisco Aironet radio device that uses N connectors. Grounding runs through a static discharge unit such as the AIR-ACC245LA-R. Browse other antennas in Cisco wireless.
| Part number | AIR-ANT5114P-N |
| Antenna type | 2 x 2 patch array |
| Band | 5 GHz |
| Gain | 14 dBi (5470-5850 MHz) |
| Polarization | Linear, vertical |
| Azimuth half-power beamwidth | 29 degrees |
| Elevation half-power beamwidth | 25 degrees |
| Front-to-back ratio | 20 dB |
| Connector | Female N |
| Cable | Separate low-loss cable required |
| Mounting | Articulating mount included, wall or pole, masts up to 2 in. diameter |
| Compatible with | Cisco Aironet access points and bridges, including outdoor access points, and any 5 GHz Cisco Aironet radio device with N connectors |