Home / Shop
- Description
- Specifications
With a 73-degree E-plane and 75-degree H-plane beamwidth, the AIR-ANT2460P-R is a Cisco Aironet 6-dBi single patch antenna for 2400 to 2484 MHz. Polarization is linear and vertical, front-to-back ratio is 18 dB, cross-pol discrimination is 15 dB and the nominal input impedance is 50 ohms. The antenna is UL 2043 compliant.
The flat housing is 4 in. (10.1 cm) long, 3.6 in. (9.1 cm) wide and 1 in. (2.5 cm) high, and the 36 in. (91.4 cm) lead is AA-9303 or equivalent plenum-rated cable with an RP-TNC plug. Any flat vertical surface works, indoors or outdoors. Wall material matters for coverage: a signal passes through five or six walls of drywall or wood, three or four of concrete or wood block, and only one or two of solid or pre-cast concrete, while thick metal reflects it.
It works with Cisco Aironet access points and bridges and with any 2.4-GHz Cisco Aironet radio device that has an RP-TNC connector. For grounding, the lead connects to a static discharge unit such as the AIR-ACC245LA-R. Other antennas and accessories are in Cisco wireless.
| Part number | AIR-ANT2460P-R |
| Antenna type | Single patch |
| Frequency range | 2400-2484 MHz |
| Peak gain | 6.0 dBi |
| Nominal input impedance | 50 ohms |
| 2:1 VSWR bandwidth | 2400-2484 MHz |
| Polarization | Linear, vertical |
| 3-dB beamwidth | E-plane 73 degrees, H-plane 75 degrees |
| Front-to-back ratio | 18 dB |
| Cross-pol discrimination | 15 dB |
| Cable | 36 in. (91.4 cm), AA-9303 or equivalent, plenum rated |
| Connector | RP-TNC |
| Dimensions (L x W x H) | 4 x 3.6 x 1 in. (10.1 x 9.1 x 2.5 cm) |
| UL 2043 | Compliant |
| Environment | Indoor and outdoor |
| Compatible with | Cisco Aironet access points and bridges and any 2.4 GHz Cisco Aironet radio device with an RP-TNC connector |