Home / Shop
- Description
- Specifications
The AIR-ACC-CLIP-20 is a Cisco Aironet converter clip kit for channel grid suspended ceilings. It holds 20 clips, which is enough to mount 10 devices, as every antenna or access point takes two clips. It mounts the Cisco Aironet 1130 Series Access Point and the AIR-ANT2430V-R, AIR-ANT5140V-R, AIR-ANT5145V-R and AIR-ANT5959 antennas.
Each clip comes apart when its OFF tabs are pushed. The two halves go on opposite sides of the ceiling channel with the ON arrows facing each other, then snap together by pressing the ON tabs, and two set screws tighten the clip onto the channel without overtightening. An antenna attaches through its E-Z clips, which slide into the slots on the converter clips until they stop.
For an access point, two index marks 3.5 in. (8.9 cm) apart go on the channel rail, matching the tabs on the adjustable mounting bracket, and the clips are centered over the marks. The bracket snaps onto the clips, followed by the mounting plate and the access point. Installation also takes a pencil, a ruler, a small standard screwdriver, masking tape and a cutting tool for ceiling tiles. More mounting hardware is in Cisco wireless.
| Part number | AIR-ACC-CLIP-20 |
| Type | Converter clip for channel grid suspended ceilings |
| Kit contents | 20 clips |
| Devices per kit | 10 |
| Clips per device | 2 |
| Clip fastening | 2 set screws onto the ceiling channel |
| Access point bracket spacing | 3.5 in. (8.9 cm) |
| Tools needed | Pencil, ruler, small standard screwdriver, masking tape, tile cutting tool |
| Compatible with | Cisco Aironet 1130 Series Access Point, AIR-ANT2430V-R, AIR-ANT5140V-R, AIR-ANT5145V-R, AIR-ANT5959 |