Home / Shop
- Description
- Specifications
The ASR1000-RP3 is the Cisco ASR 1000 Route Processor 3. It has a quad-core 2.2 GHz Intel CPU with 8 GB of DRAM by default, field-replaceable up to 64 GB with 16, 32 or 64 GB options, and the memory includes error detection and correction.
Storage is a 100 GB SSD by default, with 200 GB and 400 GB field-replaceable options, plus 8 GB of eUSB bootflash and NVRAM and 2 MB of on-board failure logging. The Enhanced Serdes Interconnect runs at 25 Gbps.
Front-panel connections are an RJ-45 console (9600 baud by default, up to 115.2 kbps with hardware flow control), a mini-USB console, an RJ-45 auxiliary port for remote management, an RJ-45 management Ethernet port, two USB ports (USB0 and USB1) for secure key distribution, and an RJ-45 BITS timing input that is not yet supported on the RP3 in IOS XE 16.3.1.
The RP3 works in the ASR 1006-X, ASR 1009-X and ASR 1013. It is not supported in the ASR 1001, 1001-X, 1002, 1002-X, 1002-HX, 1001-HX, 1004 or 1006. Compatible embedded services processors are the ESP40, ESP100 and ESP200, while the ESP5, ESP10 and ESP20 are not supported. Compatible line cards include the SIP40, MIP100, 2T+20X1GE and 6TGE; the SIP10 is not supported.
Status LEDs cover power, active, standby and status, critical, major and minor alarms, hard drive, USB, bootflash, carrier and link. For the earlier generation in the same family, see the ASR1000-RP2.
Related: Cisco ASR 1000 router parts
| Designation | ASR1000-RP3 |
| Type | ASR 1000 Route Processor 3 |
| CPU | quad-core 2.2 GHz Intel |
| DRAM | 8 GB default, up to 64 GB |
| SSD | 100 GB default (200 GB and 400 GB options) |
| Bootflash / NVRAM | 8 GB eUSB |
| Interconnect | Enhanced Serdes Interconnect, 25 Gbps |
| Console | RJ-45 and mini-USB |
| Other ports | RJ-45 AUX, RJ-45 management Ethernet, 2 x USB |
| Chassis | ASR 1006-X, ASR 1009-X, ASR 1013 |
| Compatible ESPs | ESP40, ESP100, ESP200 |