Home / Shop
- Description
- Specifications
The C3KX-NM-10GT is the Cisco 10GBASE-T network module for the Catalyst 3750-X and 3560-X Series, with two 10GBASE-T copper ports on RJ-45 connectors. The default switch configuration does not include an uplink module; this module fills the uplink slot.
Each port can run at 10 Gigabit Ethernet or at Gigabit Ethernet speed, set by manual configuration with the hw-module switch command. The module is hot-swappable, like the other three uplink modules in the family.
Copper reach at 10 Gbps depends on cable category: Category 7a and Category 7 run to 100 m, Category 6a runs to 100 m when the cable has 3 dB insertion loss margin at 250 MHz, and Category 6 runs to 55 m.
The other Catalyst 3750-X and 3560-X uplink options are the C3KX-NM-1G with four Gigabit ports, the C3KX-NM-10G with two 10 Gigabit SFP+ ports (four physical ports, two SFP+ and two regular SFP), and the C3KX-SM-10G service module. Compare the C3KX-NM-10G SFP+ network module or the C3KX-NM-1G 4-port network module, or browse Cisco switches.
| Part number | C3KX-NM-10GT |
| Product | Cisco Catalyst 3K-X 10GBASE-T network module |
| Ports | 2 x 10GBASE-T (RJ-45) |
| Speeds | 10 Gigabit Ethernet or Gigabit Ethernet (manual configuration) |
| Cable reach at 10G | Cat 7a 100 m, Cat 7 100 m, Cat 6a 100 m, Cat 6 55 m |
| Hot-swappable | Yes |
| Included in default switch configuration | No |
| Compatible with | Cisco Catalyst 3750-X and 3560-X Series switches |