Home / Shop
- Description
- Specifications
The Cisco SG300-10MPP is a 10-port Layer 3 managed switch in the Cisco 300 Series. Eight Gigabit ports supply Power over Ethernet (PoE and PoE+, 802.3at), and two combo Gigabit uplinks pair an RJ-45 port with an SFP slot. The PoE budget is 124 W dedicated to PoE.
Switching capacity is 20 Gbps with forwarding performance of 14.88 Mpps at 64-byte packets. The MAC address table holds 16K entries, the switch supports 4K active VLANs and static IPv4 routing, and jumbo frames up to 9KB pass through. Management runs over SNMP 1, SNMP 2c, SNMP 3, RMON, Telnet, HTTP, HTTPS, SSH and CLI, with authentication through SSH, RADIUS and TACACS+. Spanning Tree, Rapid Spanning Tree and Multiple Spanning Tree are supported, along with IGMP snooping, MLD snooping, ACL filtering, QoS, port mirroring and IPv6.
On a combo port, the SFP slot shares its position with the adjacent RJ-45 port, and the RJ-45 port is disabled while the SFP is active. Command line setup runs through the console port with the included serial cable, and a rack-mount kit is also in the box. It is 11 in wide, 6.7 in deep and 1.45 in high, weighs 2.73 lbs, and runs from an external power adapter at AC 120/230 V, 50/60 Hz. Memory is 128 MB RAM and 16 MB flash.
The SG300-10MP is also on the site as the SG300-10MP with the same 124 W PoE budget across 8 ports. The full range is in Cisco switches.
| Series | Cisco 300 Series Managed Switches |
| Type | 10-port Layer 3 managed switch |
| Ports | 8 x Gigabit PoE + 2 x combo Gigabit RJ-45/SFP |
| PoE standard | 802.3at (PoE and PoE+) |
| PoE power | 124 W across 8 ports |
| Switching capacity | 20 Gbps |
| Forwarding performance | 14.88 Mpps (64-byte packets) |
| MAC address table | 16K entries |
| VLANs | 4K active |
| Memory | 128 MB RAM, 16 MB flash |
| Power | external adapter, AC 120/230 V, 50/60 Hz |
| Dimensions (W x D x H) | 11 x 6.7 x 1.45 in |
| Weight | 2.73 lbs |
| Included | serial cable, rack-mount kit |