CP-HS-WL-562-S-EU Cisco Headset 562 Wireless, Standard Base

CP-HS-WL-562-S-EU (also written CP-HS-WL-562-S-EU=) is the Cisco Headset 562, a wireless dual (both ears) headset with the Standard Base Station, in the frequency band for Europe, the U.K., Asia, South Africa, Hong Kong, Australia and New Zealand. The 562 uses DECT technology, with region-specific frequencies, and the headset weighs 121 g.

Range is up to 100 meters (333 feet) from the base. Battery life is up to 10 hours of active use, up to 60 hours of standby and up to 200 days in storage. The standard base makes 1 simultaneous connection, by USB or by RJ9/RJ11 Y cable for Cisco IP phones, and does not support Bluetooth. A USB-A cable and an RJ9/11 Y cable come with the base, while USB-C cables are separate parts.

Audio runs in narrowband (8 kHz), wideband (16 kHz) or full band (48 kHz), with the headset picking the best available mode for calls and music. AES-128 encryption secures the link. On-ear controls handle answer, end, reject, hold and resume, mute and volume, and the headset answers calls automatically when lifted off the base and ends them when docked. Up to three more headsets can pair to the same base for training, each keeping its own settings and joining on mute.

The microphone is an electret condenser, unidirectional, with a 150 to 6800 Hz frequency response. Earpiece bandwidth is 50 Hz to 18 kHz at about 90 ohms speaker impedance, maximum sound pressure is 118 dB SPL(A), and acoustic spike protection covers sounds above 118 dB.