Home » Store » Dell » Dell Servers SSD » 8NW1H: Dell 400GB 6Gbps SAS 2.5in SFF SSD (Pliant LB406S)

8NW1H: Dell 400GB 6Gbps SAS 2.5in SFF SSD (Pliant LB406S)

The Dell 8NW1H is a 400GB 12Gb/s SAS solid-state drive in a 2.5 inch small form factor (SFF), drive model LB406S.

Sourcing mission-critical hardware shouldn't mean gambling on auction sites or automated shopping carts. You get direct access to dedicated specialists who answer the phone, confirm exact compatibility, and deliver project-ready pricing built around your deployment timeline.

Home / Shop / Dell / EMC / Storage (Dell / EMC)

8NW1H: Dell 400GB 6Gbps SAS 2.5in SFF SSD (Pliant LB406S)
8NW1H: Dell 400GB 6Gbps SAS 2.5in SFF SSD (Pliant LB406S)
8NW1H: Dell 400GB 6Gbps SAS 2.5in SFF SSD (Pliant LB406S)

Home / Shop / Dell / EMC / Storage (Dell / EMC)

8NW1H: Dell 400GB 6Gbps SAS 2.5in SFF SSD (Pliant LB406S)

Model Number: 8NW1H
The Dell 8NW1H is a 400GB 12Gb/s SAS solid-state drive in a 2.5 inch small form factor (SFF), drive model LB406S.
Maximum quantity exceeded
Minimum purchase amount of 0 is required
Maximum purchase amount of 0 is allowed
Missing Inquiry Options
*Your Name:
*Your Email:
*Your Message:
Please send me a copy
0.000
Categories: Dell Servers SSD
Manufacturer: Dell
Facebook
X
Email
LinkedIn
  • Description
  • Specifications

The Dell 8NW1H is a 400GB 6Gb/s SAS solid-state drive in a 2.5 inch small form factor (SFF), drive model LB406S.

Specifications: part number 8NW1H (also searched as 08NW1H) · drive model LB406S · brand Dell · capacity 400GB · interface 6Gb/s SAS · size 2.5 inch SFF · type SSD.

Dell Part Number: 8NW1H (Pliant LB406S)

This PN provides one 2.5 inch Small Form Factor (SFF) 400GB Hot Swappable Serial Attached SCSI (SAS 2) 6Gbps SSD (Solid State Drive)

This Dell 8NW1H drive is compatible with the Dell EMC PowerVault MD34XX/38XX Series.

Compatibility and specifications

8NW1H is the SanDisk (Pliant) Lightning LB406S, the 400 GB model of SanDisk's Lightning Write-Intensive SAS SSDs: SLC flash on a dual-port 6Gb/s SAS interface, with capacitor-backed cache, aimed at a 50/50 read/write mix such as database logging. SanDisk rates it at up to 450/250 MB/s sequential read/write, 118,000 random read IOPS and 33,000 IOPS on 4 KB 50/50 random writes; the mixed-use LB406M (8C38W) is rated lower at 385/220 MB/s sequential and 100,000 random read IOPS. Dell lists 8NW1H with firmware D339 in the MD34XX/38XX (Rev. A25) and MD32XX/36XX (Rev. A24) matrices and in the MD3060e enclosure matrix; TPWNJ is the 200 GB LB206S from the same write-intensive line.

Dell part number8NW1H
SanDisk modelLB406S (Lightning Write-Intensive)
Capacity400 GB
FlashSLC
InterfaceSAS 6Gb/s, dual port
Sector sizes512, 520 or 528 bytes
Sequential read / write450 / 250 MB/s
Random read / write (4 KB 50/50)118,000 / 33,000 IOPS
Power, idle / typical3.9 W / 5.9 W
MTBF2 million hours
Height15.0 mm
Dell firmware (MD34XX/38XX and MD32XX/36XX)D339

Browse more Dell EMC storage parts, or compare the Dell TPWNJ 200GB write-intensive SSD and the Dell 8C38W 400GB mixed-use SSD.

Dell EMC Part Number8NW1H
Manufacturer Part NumberLB406S
ManufacturerPliant (SanDisk)
Form Factor2.5 inch Small Form Factor (SFF)
Capacity400 GB
ManufacturerPliant (SanDisk)
Self Encrypting (SED)No
FirmwareD339
Hot SwapYes
InterfaceSerial Attached SCSI (SAS 2)
Transfer Rate6Gb/s
Average Idle Power3.9 Watts
Average Operating Power5.9 Watts
MTBF2 million hours
Compatible WithDell EMC PowerVault MD34XX/38XX Series