Home / Shop / HPE / Drives HDD (HPE)






- Description
- Specifications
G0M44A is the HPE option number for a 4 TB SAS 7.2K rpm LFF hard disk drive in the midline (MDL) class. HPE's catalog name for it reads "Hpe Msa 4Tb 6G SAS 7.2K LFF(3.5In) Midline Self Encrypted Hard Drive".
HPE spare number
HPE's service parts list shows spare number 757350-001 for this option, described as: 4TB Midline Serial Attached SCSI (SAS), MSA drive, Federal Information Processing Standard (FIPS), Self-Encrypting Drive (SED) - 7,200 RPM, 3.5-inch Large Form Factor (LFF), 6 Gb/s transfer rate.
Where it fits
PartSurfer describes spare 757350-001 as an MSA FIPS self-encrypting drive; MSA drives are for MSA arrays only.
Controller note
G0M44A runs behind MSA array controllers, not ProLiant Smart Array or S100i controllers.
Terms in this part
- FIPS: encrypted to the Federal Information Processing Standard
- SED: self-encrypting drive
- LFF: large form factor, 3.5-inch
Same family, other capacities
2 TB 6G SED is C8R22A (spare 717872-001); 4 TB 12G SED is Q1H48A (spare 873372-001).
Also listed under part number 757350-001. Both numbers go to this page; ask for a quote on either.
Compatibility and specifications
G0M44A is the 6 Gb/s MSA 4TB 7.2K LFF midline self-encrypting drive; PartSurfer lists the service spare 757350-001 as an MSA FIPS SED. The MSA 2040 QuickSpecs set the rules for MSA SEDs. Self-encrypting drives are supported on the MSA 2040 array with controller firmware GL105 or later, every drive in the array must be a SED before encryption can be turned on, and SEDs in a mixed array run unencrypted. All MSA SEDs are FIPS 140-2 validated. The 12 Gb/s replacement at the same capacity is Q1H48A (spare 873372-001), listed for both the MSA 2040 and the MSA 2050. The 2 TB 6G SED is C8R22A.
| Option / spare | G0M44A / 757350-001 |
| Drive | 4 TB SAS 6 Gb/s, 7,200 rpm, 3.5-inch LFF, midline, FIPS SED |
| Encryption platform | HPE MSA 2040, firmware GL105 or later |
| Encryption rule | All drives in the array must be SED |
| 12G equivalent | Q1H48A (spare 873372-001) |
| HPE G0M44A Specs | |
| Option part number | G0M44A |
| Capacity | 4 TB |
| Interface | SAS |
| Rotational speed | 7.2K rpm |
| Form factor | LFF |
| Class | midline (MDL) |
| HPE spare number | 757350-001 |
