Home / Shop
- Description
- Specifications
The J9150A is the HPE X132 10G SFP+ LC SR Transceiver, a 10-Gigabit transceiver in the SFP+ form factor that supports the 10-Gigabit SR standard. It provides one LC 10-GbE port (IEEE 802.3ae Type 10Gbase-SR), full duplex only, at a wavelength of 850 nm, with connectivity up to 300 m on multimode fiber.
The cable is 62.5/125 or 50/125 micron (core/cladding) graded-index, low metal content multimode fiber, complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a respectively. Maximum distance depends on the fiber grade: 2 to 26 m on 62.5 micron cable at 160 MHz*km, 2 to 33 m on 62.5 micron cable at 200 MHz*km, 2 to 66 m on 50 micron cable at 400 MHz*km, 2 to 82 m on 50 micron cable at 500 MHz*km, and 2 to 300 m on 50 micron cable at 2000 MHz*km.
Fiber patch cords should use Ultra Physical Contact (UPC) surface termination and polish; Angled Physical Contact (APC) is not recommended. Power draw is 0.6 W typical and 0.8 W maximum. The module measures 2.19 in deep, 0.54 in wide and 0.47 in high (5.57 x 1.38 x 1.19 cm) and weighs 0.04 lb (0.02 kg). Relative humidity of 0% to 85%, non-condensing, and altitude up to 10,000 ft (3 km) apply in service.
The J9150A is one of four X132 SFP+ parts in its family, alongside the J9151A LR, the J9152A LRM and the J9153A ER. More switch optics are in HPE switches.
Related part: J9152A HPE X132 10G SFP+ LC LRM Transceiver
Related: HP ProCurve switch parts
| Part number | J9150A |
| Standard | IEEE 802.3ae 10GBASE-SR |
| Ports | 1 LC 10-GbE, full duplex only |
| Wavelength | 850 nm |
| Form factor | SFP+ |
| Fiber | multimode 62.5/125 or 50/125 micron |
| Maximum distance | 2-300 m (50 micron, 2000 MHz*km) |
| Power consumption | 0.6 W typical, 0.8 W maximum |
| Dimensions | 2.19 D x 0.54 W x 0.47 H in |
| Weight | 0.04 lb (0.02 kg) |
| Patch cords | UPC polish, APC not recommended |