Home / Shop
- Description
- Specifications
The J9151A is the HPE X132 10G SFP+ LC LR Transceiver, a 10-Gigabit transceiver in the SFP+ form factor that supports the 10-Gigabit LR standard. It provides one LC 10-GbE port (IEEE 802.3ae Type 10Gbase-LR), full duplex only, at a wavelength of 1310 nm, with connectivity up to 10 km on single-mode fiber.
The cable is low metal content single-mode fiber-optic cable complying with ITU-T G.652 and ISO/IEC 793-2 Type B1. The maximum distance is 2 m to 10 km on 9/125 micron single-mode cable, and the fiber type is single mode only. Conditioning patch cord cables are not supported. Fiber patch cords should use Ultra Physical Contact (UPC) surface termination and polish; Angled Physical Contact (APC) is not recommended.
Power draw is 0.9 W typical and 1 W maximum. The module measures 2.19 in deep, 0.54 in wide and 0.47 in high (5.57 x 1.38 x 1.19 cm) and weighs 0.04 lb (0.02 kg). Relative humidity of 0% to 85%, non-condensing, and altitude up to 10,000 ft (3 km) apply in service.
Within the X132 SFP+ family the J9151A is the 10 km single-mode option, next to the J9150A SR for multimode fiber, the J9152A LRM for legacy multimode and the J9153A ER. More switch optics are in HPE switches.
Related part: J9152A HPE X132 10G SFP+ LC LRM Transceiver
Related: HP ProCurve switch parts
| Part number | J9151A |
| Standard | IEEE 802.3ae 10GBASE-LR |
| Ports | 1 LC 10-GbE, full duplex only |
| Wavelength | 1310 nm |
| Form factor | SFP+ |
| Fiber | single-mode 9/125 micron |
| Maximum distance | 2 m to 10 km |
| Power consumption | 0.9 W typical, 1 W maximum |
| Dimensions | 2.19 D x 0.54 W x 0.47 H in |
| Weight | 0.04 lb (0.02 kg) |
| Patch cords | UPC polish, APC not recommended |
| Conditioning patch cords | not supported |