Home / Shop / Aruba / Switches (Aruba)
- Description
- Specifications
The JL325A is the 2-port stacking module for the Aruba 2930M switch series. It slots into the stacking module slot at the rear of a 2930M switch, and each switch takes at most one. Each of its two ports supports up to 25 Gbps in each direction, which gives up to 100 Gbps of stacking throughput per switch.
A stack is cabled as a ring of up to ten members. At least one and at most two stacking cables are needed per module, chosen from the 0.5 m J9734A, the 1 m J9735A and the 3 m J9736A, which are shared with the 2920 series. Once cabled, the stacked switches behave as a single chassis with one management point.
IEEE 1588v2 transparent-clock timing is not supported on this module. Every 2930M model has a stacking module slot, among them the JL319A 24-port and JL321A 48-port non-PoE switches and the PoE models.
The spare number is JL325-61001, the 2930 2-port Stacking Module. Cabling for the stack comes from the J9735A 1 m cable or the other lengths named above; see the Aruba and ProCurve switches category for related options.
| JL325A Specs | |
| Part number | JL325A |
| Type | 2-port stacking module |
| Fits | Aruba 2930M switch series |
| Stacking rate | 25 Gbps per port per direction |
| Stacking throughput | up to 100 Gbps per switch |
| Modules per switch | 1 |
| Cables per module | 1 to 2 |
| Stack topology | ring, up to 10 members |
| Cable lengths | 0.5 m, 1 m, 3 m |
| IEEE 1588v2 (PTP) | not supported |