Home / Shop


- Description
- Specifications
The RSP720-3CXL-10GE is a Cisco 7600 Series Route Switch Processor 720 that carries the high-capacity PFC3CXL policy feature card and an MSFC4. The 720-Gbps switch fabric is integrated, and the uplink side has two 10-Gigabit Ethernet ports for X2 modules plus three Gigabit Ethernet ports, two for SFP modules and one 10/100/1000 RJ-45.
Memory on the MSFC4 is 512 MB of bootflash, 4 MB of NVRAM and 4 MB of ROMmon. The route processor takes 1 to 2 GB of DRAM with a 2 GB default, and the switch processor takes 1 to 2 GB with a 1 GB default. There is no memory-only upgrade option for this card. A CompactFlash Type II slot sits on the front panel and a 2-GB internal CompactFlash is split 1 GB each between the two processors. Power draw is 7.33 A at 42 V, and the card needs larger power supplies. The minimum release is Cisco IOS 12.2(33)SRC, and the spare is ordered as RSP720-3CXL-10GE=.
Release 12.2SRC limits this card. NSF/SSO and ISSU are unavailable and only Route Processor Redundancy mode runs, the uplinks on a standby card stay inactive, and broadband aggregation is not supported. Unsupported with this card are the Cisco 7603 and 7606 chassis and, among modules, services modules other than the Network Analysis Module, Optical Service Modules and the FlexWAN module. The 7600-SSC-400 works with it from 12.2(33)SRE.
Supported 10-Gigabit optics are X2-10GB-LR, X2-10GB-ER, X2-10GB-SR, X2-10GB-CX4 and X2-10GB-LX4. Gigabit optics include GLC-SX-MM, GLC-LH-SM, GLC-ZX-SM, GLC-T, SFP-GE-S, SFP-GE-L, SFP-GE-T, GLC-BX-D and GLC-BX-U. The PFC3C relative with a 2-port Gigabit card is the RSP720-3C-GE route switch processor. Other 7600 and Catalyst supervisors are in Cisco switches.
| Part number | RSP720-3CXL-10GE |
| Type | Cisco 7600 Series Route Switch Processor 720 |
| Policy feature card | PFC3CXL (high-capacity) with MSFC4 |
| Switch fabric | 720 Gbps, integrated |
| Uplinks | 2 x 10 Gigabit Ethernet (X2), 2 x Gigabit Ethernet (SFP), 1 x 10/100/1000 RJ-45 |
| MSFC4 memory | 512 MB bootflash, 4 MB NVRAM, 4 MB ROMmon |
| DRAM | Route processor 1-2 GB (default 2 GB); switch processor 1-2 GB (default 1 GB) |
| Flash | 1 CompactFlash Type II slot; 2 GB internal CompactFlash |
| Power required | 7.33 A at 42 V |
| Minimum software | Cisco IOS 12.2(33)SRC |
| Spare number | RSP720-3CXL-10GE= |
| Compatible with | Cisco 7600 Series routers except Cisco 7603 and 7606 |
