Home / Shop
- Description
- Specifications
UCSB-MLOM-40G-04 is the Cisco UCS VIC 1440 modular LOM (mLOM) for blade servers; the spare is UCSB-MLOM-40G-04=. The B200 M5 spec sheet says the blade must be ordered with a VIC mLOM, and lists two: this VIC 1440 and the VIC 1340.
The adapter works with one or two CPUs installed. Cisco describes the 1300 and 1400 series VICs as having two converged network adapter ports for Ethernet and FCoE, up to 80 Gbps of total I/O, and support for up to 256 PCIe virtual adapters and interfaces.
With the mLOM alone, the spec sheet shows 40 Gbps of aggregate bandwidth through 2408, 2304V2 and 2208XP fabric extenders and 20 Gbps through a 2204XP. Adding the rear port expander raises it, but Cisco does not allow a VIC 1440 to be mixed with a VIC 1380 mezzanine.
Software matters as much as hardware here: Cisco states that the VIC 1440 needs UCS Manager 4.0(1) or later, and that with a UCS 6536 fabric interconnect it is supported in Intersight Managed Mode from 4.2(2).
If your domain runs an older UCSM release, the UCSB-MLOM-40G-03 VIC 1340 is the alternative mLOM, and the UCSB-B200-M5 blade it fits is also listed. More UCS parts are on our Cisco UCS C220 M5 and B200 M5 hub. Check the UCSM version and fabric extender model before choosing between the two cards.
Related part: UCSB-MLOM-40G-01 Cisco UCS Virtual Interface Card 1240 Modular LOM
Related part: UCSC-MLOM-CSC-02 Cisco UCS VIC 1227 Dual-Port 10Gb SFP+ mLOM Adapter
Related part: UCS-VIC-M82-8P Cisco UCS VIC 1280 Mezzanine Adapter
| UCSB-MLOM-40G-04 Specs | |
| Product ID | UCSB-MLOM-40G-04 (spare UCSB-MLOM-40G-04=) |
| Name | Cisco UCS VIC 1440 modular LOM |
| Form factor | mLOM, blade server |
| Fits | Cisco UCS B200 M5 |
| CPUs required | 1 or 2 |
| Bandwidth, mLOM only | 40 Gbps (2408/2304V2/2208XP), 20 Gbps (2204XP) |
| Not mixable with | VIC 1380 mezzanine |
| Software | UCSM 4.0(1) or later |
| Alternative mLOM | UCSB-MLOM-40G-03 (VIC 1340) |