Home / Shop


- Description
- Specifications
WS-X6148-RJ45V is the RJ-45 member of the Catalyst 6500 48-port 10/100 prestandard PoE pair. The Cisco prestandard PoE daughter card (WS-F6K-VPWR-GE) comes installed from the factory, and the maximum draw is 7 W per port. For 802.3af, the WS-X6148-45AF-UG= is the upgrade part.
Ports are numbered with odd ports 1 to 47 on the top row and even ports 2 to 48 on the bottom row, in two blocks of 1 to 24 and 25 to 48. Buffering is 1 MB per 8 ports, frames up to 8092 bytes are accepted, and oversubscription is 1.2:1. Queues are Tx 1p2q2t per 8 ports and Rx 1p2t per port.
Power use is 2.81 A and 118.02 W for the module, with 147.53 W AC input and 503.80 BTU/hour of heat. DC input is 158.63 W with 541.72 BTU/hour. The card takes a single connection into the 32-Gbps shared bus, and it has no distributed forwarding or pluggable transceiver support.
It fits any slot of a Catalyst 6500 or 6500-E chassis and runs with Supervisor Engine 2, 32, 32 PISA, 720 and 720-10GE. A gigabit 48-port copper card is the WS-X6148A-GE-TX 48-port classic module. Browse more switching cards under Cisco switches.
| Part number | WS-X6148-RJ45V |
| Type | Cisco Catalyst 6500 10/100 module with Cisco prestandard PoE |
| Ports | 48 x 10/100 Mbps, RJ-45 |
| PoE | Cisco prestandard daughter card (WS-F6K-VPWR-GE) installed at the factory; 7 W per port |
| 802.3af upgrade part | WS-X6148-45AF-UG= |
| Buffer | 1 MB per 8 ports |
| Frame size | Up to 8092 bytes |
| Oversubscription | 1.2:1, 32-Gbps shared bus |
| Module current and power | 2.81 A; 118.02 W |
| AC-input power and heat | 147.53 W; 503.80 BTU/hour |
| DC-input power and heat | 158.63 W; 541.72 BTU/hour |
| Distributed forwarding | Not supported |
| Pluggable transceivers | Not supported |
| Compatible with | Supervisor Engine 2, 32, 32 PISA, 720 and 720-10GE in Catalyst 6500 and 6500-E chassis |
