Home » Store » Cisco » Cisco Switch » WS-X6148X2-45AF Cisco Catalyst 6500 96-Port 10/100 RJ-45 802.3af PoE Module

WS-X6148X2-45AF Cisco Catalyst 6500 96-Port 10/100 RJ-45 802.3af PoE Module

Catalyst 6500 96-port 10/100 RJ-45 module with a factory-installed 802.3af PoE card and a splitter panel.

Built for end users, business partners, government agencies, and contractors, we replace auction-site guesswork with direct human support. You get dedicated specialists who answer the phone, confirm exact compatibility, and deliver project-ready pricing built around your deployment timeline.

Home / Shop

WS-X6148X2-45AF Cisco Catalyst 6500 96-Port 10/100 RJ-45 802.3af PoE Module
WS-X6148X2-45AF Cisco Catalyst 6500 96-Port 10/100 RJ-45 802.3af PoE Module
WS-X6148X2-45AF Cisco Catalyst 6500 96-Port 10/100 RJ-45 802.3af PoE Module

Home / Shop

WS-X6148X2-45AF Cisco Catalyst 6500 96-Port 10/100 RJ-45 802.3af PoE Module

Model Number: WS-X6148X2-45AF
Catalyst 6500 96-port 10/100 RJ-45 module with a factory-installed 802.3af PoE card and a splitter panel.
Maximum quantity exceeded
Minimum purchase amount of 0 is required
Maximum purchase amount of 0 is allowed
Missing Inquiry Options
*Your Name:
*Your Email:
*Your Message:
Please send me a copy
0.000
Categories: Cisco Switch
Manufacturer: Cisco
Facebook
X
Email
LinkedIn
  • Description
  • Specifications

The WS-X6148X2-45AF reaches 96 ports of 10/100 from 48 RJ-45 connectors: each connector carries two ports, and the supplied WS-F6K-48X2-SPLTR splitter panel breaks them out. Ports number 1/49 to 47/95 on the top row and 2/50 to 48/96 on the bottom row. An IEEE 802.3af PoE daughter card (WS-F6K-FE48X2-AF=) is installed at the factory, and PoE reaches 15.4 W per port.

In 48-port operation the PoE card can support up to 48 Class 3 (15.4 W) devices, and in 96-port operation up to 96 Class 2 (7 W) devices. Buffering is 1.116 MB per port, frames up to 9216 bytes are accepted, and the module has four egress queues and two ingress queues. TDR is not supported.

Module current is 3.07 A at 128.94 W. AC input is 161.18 W with 550.41 BTU/hour of heat, and DC input is 173.31 W with 591.84 BTU/hour. The splitter panel measures 3.5 x 19 x 1.25 in. (8.9 x 48.26 x 3.18 cm) and takes 2 RUs in the rack.

No chassis or slot restrictions apply across Catalyst 6500 and 6500-E chassis, and Supervisor Engine 2, 32, 32 PISA, 720 and 720-10GE are supported. Pluggable transceivers and distributed forwarding are not supported. Higher-density 6500 cards are in Cisco switches.

Part numberWS-X6148X2-45AF
TypeCisco Catalyst 6500 classic 96-port 10/100 module with 802.3af PoE
Ports48 RJ-45 connectors, two ports each, 96 ports with the splitter panel
Splitter panelWS-F6K-48X2-SPLTR, 3.5 x 19 x 1.25 in. (8.9 x 48.26 x 3.18 cm), 2 RUs
PoEIEEE 802.3af daughter card (WS-F6K-FE48X2-AF=) installed at the factory; 15.4 W per port
Buffer1.116 MB per port
Frame sizeUp to 9216 bytes
Queues4 egress; 2 ingress
Module current and power3.07 A; 128.94 W
AC-input power and heat161.18 W; 550.41 BTU/hour
DC-input power and heat173.31 W; 591.84 BTU/hour
TDRNot supported
Compatible withSupervisor Engine 2, 32, 32 PISA, 720 and 720-10GE in Catalyst 6500 and 6500-E chassis