Home / Shop
- Description
- Specifications
Forty-eight 10/100/1000 copper ports and a DFC4XL make up the WS-X6848-TX-2TXL, a 6800 Series module for Catalyst 6500 E-Series chassis in the Cisco interface cards range. Each RJ-45 port runs over Category 5 cabling for distances up to 100 m.
Each port has a transmit queue structure of 1p3q8t and a receive structure of 2q8t, scheduled with DWRR. Buffers per port are 166 KB on receive and 1.17 MB on transmit. Forwarding reaches 60 Mpps for Layer 2, IPv4 and MPLS traffic, and up to 30 Mpps for IPv6, with jumbo frames up to 9216 bytes.
Power draw is 410 W, the fabric link is 2 x 20 Gbps full duplex, and default memory is 1 GB. A 6513-E chassis can hold up to 528 ports of this module, and a 6509-E chassis can hold up to 384 ports.
Supported slots are every slot of the 6503-E, 6504-E, 6506-E, 6509-E and 6509-V-E chassis, plus slots 1 to 6 and 9 to 13 of the 6513-E. The module is limited to E-Series chassis and pairs with Supervisor Engine 2T or 2TXL.
Related: Cisco 6509 switch parts
Related part: WS-X6848-TX-2T Cisco Catalyst 6800 48-Port 10/100/1000 Copper Module with DFC4
| Part number | WS-X6848-TX-2TXL |
| Ports | 48 x 10/100/1000, RJ-45 |
| Cabling | Category 5, up to 100 m |
| Forwarding card | DFC4XL |
| Queues | Tx 1p3q8t, Rx 2q8t |
| Buffers per port | Rx 166 KB, Tx 1.17 MB |
| Fabric connection | 2 x 20 Gbps full duplex |
| Memory | 1 GB |
| Power | 410 W |
| Dimensions (H x W x D) | 1.2 x 14.4 x 16 in (3.0 x 35.6 x 40.6 cm) |
| Maximum ports | 528 (6513-E), 384 (6509-E) |
| Product name | 6800 Series 48-Port 1 Gigabit Copper Ethernet Module with DFC4 & DFC4XL |