Home / Shop


- Description
- Specifications
IBM feature #EC3L is the low-profile version of the PCIe3 2-port 100 GbE NIC & RoCE QSFP28 adapter, CCIN 2CEC. Feature #EC3M is the same adapter with a full-height tailstock, and both feature numbers carry one card and one FRU, 00WT078. The adapter is a PCI Express generation 3 x16 card with two 100 Gb QSFP28 ports and supports both NIC and IBTA RoCE operation.
A single port can use full bandwidth in a PCIe3 slot, and the two ports together reach up to 128 Gb/s minus overheads. The card uses the Mellanox ConnectX-4 EN network controller and runs in Ethernet or RoCE mode only. NIC and RoCE operate concurrently, with RoCE available on Linux and AIX 7.2 and later, while NIC is supported on all operating systems.
Offloads include TCP/UDP/IP stateless offload, LSO, LRO and checksum offload. The adapter provides NIM boot support and PowerVM SR-IOV support, is PCIe3 compliant and compatible with PCIe 1.1 and 2.0, and is backward compatible with 40 Gb Ethernet when compatible cables and transceivers are used.
Cabling for 100G runs through direct attach copper cables up to 2 m or active optical cables up to 100 m, with QSFP28 transceivers on each end. For 40G, direct attach copper cables up to 5 m are available. The QSFP28 optical transceiver #EB59 is a 100GBASE-SR4 module that reaches 100 m over OM4 or 70 m over OM3 cable, and QSFP+ transceivers #EB27 and #EB57 can also be installed in the ports. The card is a short, 3.3 V design.
| Feature code | #EC3L |
| Also orderable as feature code | #EC3M (full-height tailstock, same card, FRU 00WT078) |
| CCIN | 2CEC |
| Adapter FRU number | 00WT078 |
| Ports | 2 x 100 Gb QSFP28 |
| Controller | Mellanox ConnectX-4 EN |
| I/O bus | PCIe3 x16 |
| Form factor | short, low-profile (#EC3L); short, full-height tailstock (#EC3M) |
| Voltage | 3.3 V |
| Modes | NIC and RoCE (Ethernet only) |
| Boot | NIM boot supported |
| Optical transceiver | #EB59 100GBASE-SR4 |
