Home » Store » IBM » IBM Interface Card » IBM #EC27 PCIe2 LP 2-Port 10GbE RoCE SFP+ Adapter for IBM Power Systems

IBM #EC27 PCIe2 LP 2-Port 10GbE RoCE SFP+ Adapter for IBM Power Systems

IBM #EC27 low-profile PCIe2 x8 dual-port 10 GbE RoCE adapter with SFP+ ports, CCIN EC27; #EL27 is the Linux equivalent.

Built for end users, business partners, government agencies, and contractors, we replace auction-site guesswork with direct human support. You get dedicated specialists who answer the phone, confirm exact compatibility, and deliver project-ready pricing built around your deployment timeline.

Home / Shop

IBM #EC27 PCIe2 LP 2-Port 10GbE RoCE SFP+ Adapter for IBM Power Systems
IBM #EC27 PCIe2 LP 2-Port 10GbE RoCE SFP+ Adapter for IBM Power Systems
IBM #EC27 PCIe2 LP 2-Port 10GbE RoCE SFP+ Adapter for IBM Power Systems

Home / Shop

IBM #EC27 PCIe2 LP 2-Port 10GbE RoCE SFP+ Adapter for IBM Power Systems

Model Number: IBM FC EC27
IBM #EC27 low-profile PCIe2 x8 dual-port 10 GbE RoCE adapter with SFP+ ports, CCIN EC27; #EL27 is the Linux equivalent.
Maximum quantity exceeded
Minimum purchase amount of 0 is required
Maximum purchase amount of 0 is allowed
Missing Inquiry Options
*Your Name:
*Your Email:
*Your Message:
Please send me a copy
0.000
Categories: IBM Interface Card
Manufacturer: IBM
Facebook
X
Email
LinkedIn
  • Description
  • Specifications

The #EC27 adapter is a low-profile PCIe2 card, CCIN EC27, with two 10 Gb SFP+ ports on a PCIe 2.0 x8 host bus interface. Each SFP+ port runs at a nominal 10 Gbps and takes copper twinaxial cables up to 5 m. Link aggregation and failover are among its features. Its FRU is 000E1493, with a short form factor and a 3.3 V supply.

Feature #EL27, the Linux card, has its own FRU, 74Y1988. The card cannot be used to boot an LPAR through AIX NIM or Linux network install; a system that installs from a network source needs a different Ethernet adapter with boot capability.

Operating system levels for #EC27 are AIX 7.1 or later, AIX 6.1 or later, Red Hat Enterprise Linux 7 or later and 6.3 or later, and SUSE Linux Enterprise Server 11 Service Pack 2 or later, on firmware level 7.6 or later.

The ports need compatible SFP+ 10 Gbps active copper twinaxial Ethernet cables that meet SFF-8431 Rev 4.1 and SFF-8472 Rev 10.4 and are EMC Class A compliant. Those cables come as #EN01 (1 m, part 46K6182, CCIN EF01), #EN02 (3 m, part 46K6183, CCIN EF02) and #EN03 (5 m, part 46K6184, CCIN EF03).

Feature code#EC27
Linux card#EL27 (own FRU 74Y1988)
CCINEC27
Adapter FRU number000E1493
Ports2 x 10 Gb SFP+
I/O busPCIe2 x8
Form factorshort, low-profile
Voltage3.3 V
CablesSFP+ 10 Gbps active copper twinaxial, up to 5 m (#EN01, #EN02, #EN03)
Firmwarelevel 7.6 or later
Network bootnot supported for AIX NIM or Linux network install