Home » Store » IBM » IBM Interface Card » IBM #EC3L PCIe3 LP 2-port 100GbE NIC & RoCE QSFP28 Adapter for IBM Power Systems

IBM #EC3L PCIe3 LP 2-port 100GbE NIC & RoCE QSFP28 Adapter for IBM Power Systems

IBM #EC3L two-port 100 GbE QSFP28 NIC and RoCE adapter, PCIe3 x16, CCIN 2CEC; #EC3M is the full-height bracket version.

Built for end users, business partners, government agencies, and contractors, we replace auction-site guesswork with direct human support. You get dedicated specialists who answer the phone, confirm exact compatibility, and deliver project-ready pricing built around your deployment timeline.

Home / Shop

IBM #EC3L PCIe3 LP 2-port 100GbE NIC & RoCE QSFP28 Adapter for IBM Power Systems
IBM #EC3L PCIe3 LP 2-port 100GbE NIC & RoCE QSFP28 Adapter for IBM Power Systems
IBM #EC3L PCIe3 LP 2-port 100GbE NIC & RoCE QSFP28 Adapter for IBM Power Systems

Home / Shop

IBM #EC3L PCIe3 LP 2-port 100GbE NIC & RoCE QSFP28 Adapter for IBM Power Systems

Model Number: IBM FC EC3L
IBM #EC3L two-port 100 GbE QSFP28 NIC and RoCE adapter, PCIe3 x16, CCIN 2CEC; #EC3M is the full-height bracket version.
Maximum quantity exceeded
Minimum purchase amount of 0 is required
Maximum purchase amount of 0 is allowed
Missing Inquiry Options
*Your Name:
*Your Email:
*Your Message:
Please send me a copy
0.000
Categories: IBM Interface Card
Manufacturer: IBM
Facebook
X
Email
LinkedIn
  • Description
  • Specifications

IBM feature #EC3L is the low-profile version of the PCIe3 2-port 100 GbE NIC & RoCE QSFP28 adapter, CCIN 2CEC. Feature #EC3M is the same adapter with a full-height tailstock, and both feature numbers carry one card and one FRU, 00WT078. The adapter is a PCI Express generation 3 x16 card with two 100 Gb QSFP28 ports and supports both NIC and IBTA RoCE operation.

A single port can use full bandwidth in a PCIe3 slot, and the two ports together reach up to 128 Gb/s minus overheads. The card uses the Mellanox ConnectX-4 EN network controller and runs in Ethernet or RoCE mode only. NIC and RoCE operate concurrently, with RoCE available on Linux and AIX 7.2 and later, while NIC is supported on all operating systems.

Offloads include TCP/UDP/IP stateless offload, LSO, LRO and checksum offload. The adapter provides NIM boot support and PowerVM SR-IOV support, is PCIe3 compliant and compatible with PCIe 1.1 and 2.0, and is backward compatible with 40 Gb Ethernet when compatible cables and transceivers are used.

Cabling for 100G runs through direct attach copper cables up to 2 m or active optical cables up to 100 m, with QSFP28 transceivers on each end. For 40G, direct attach copper cables up to 5 m are available. The QSFP28 optical transceiver #EB59 is a 100GBASE-SR4 module that reaches 100 m over OM4 or 70 m over OM3 cable, and QSFP+ transceivers #EB27 and #EB57 can also be installed in the ports. The card is a short, 3.3 V design.

Feature code#EC3L
Also orderable as feature code#EC3M (full-height tailstock, same card, FRU 00WT078)
CCIN2CEC
Adapter FRU number00WT078
Ports2 x 100 Gb QSFP28
ControllerMellanox ConnectX-4 EN
I/O busPCIe3 x16
Form factorshort, low-profile (#EC3L); short, full-height tailstock (#EC3M)
Voltage3.3 V
ModesNIC and RoCE (Ethernet only)
BootNIM boot supported
Optical transceiver#EB59 100GBASE-SR4