Home / Shop


- Description
- Specifications
Feature #EC28 is the regular-height PCIe2 2-Port 10 GbE RoCE SFP+ adapter, CCIN EC27, FRU 000E1491. It is a dual-port, PCIe generation-2 card with a PCIe2 x8 bus and a PCIe 2.0 host bus interface, short in length and run from a 3.3 V supply. Typical workloads are high-transaction databases, cloud computing, virtualization and storage.
The two 10 Gb SFP+ transceiver ports connect to other servers or switches. Every port carries Ethernet at a nominal 10 gigabits per second over SFP+ copper twinaxial cables up to 5 m (16.4 ft), and the adapter provides link aggregation and failover for redundant connections.
Network boot is a limitation: an LPAR cannot be booted through AIX NIM or Linux network install from this card, and a system that installs from a network source needs a second Ethernet adapter with boot capability. Supported software is AIX 7.1 with the 7100-01 Technology Level and Service Pack 3 or later, AIX 6.1 with 6100-07 and Service Pack 3 or later, Red Hat Enterprise Linux 6.3 for POWER or later and SUSE Linux Enterprise Server 11 Service Pack 2 or later, with firmware level 7.6 or later.
Cables must be active SFP+ 10 Gbps copper twinaxial Ethernet cables that comply with SFF-8431 Rev 4.1 and SFF-8472 Rev 10.4 and are EMC Class A. They are available as #EN01 at 1 m (46K6182), #EN02 at 3 m (46K6183) and #EN03 at 5 m (46K6184).
| Feature code | #EC28 |
| CCIN | EC27 |
| Adapter FRU number | 000E1491 |
| Ports | 2 x 10 Gb SFP+ |
| I/O bus | PCIe2 x8 |
| Form factor | short, regular height |
| Voltage | 3.3 V |
| Cables | active SFP+ copper twinaxial, up to 5 m (#EN01, #EN02, #EN03) |
| AIX | 7.1 TL 7100-01 SP3 or later; 6.1 TL 6100-07 SP3 or later |
| Linux | RHEL 6.3 or later; SLES 11 SP2 or later |
| Firmware | level 7.6 or later |
| Network boot | not supported for AIX NIM or Linux network install |
