Home » Store » IBM » IBM Interface Card » IBM #EC28 PCIe2 2-Port 10GbE RoCE SFP+ Adapter for IBM Power Systems

IBM #EC28 PCIe2 2-Port 10GbE RoCE SFP+ Adapter for IBM Power Systems

IBM #EC28 regular-height PCIe2 x8 dual-port 10 GbE RoCE adapter with two SFP+ ports, CCIN EC27, FRU 000E1491.

Built for end users, business partners, government agencies, and contractors, we replace auction-site guesswork with direct human support. You get dedicated specialists who answer the phone, confirm exact compatibility, and deliver project-ready pricing built around your deployment timeline.

Home / Shop

IBM #EC28 PCIe2 2-Port 10GbE RoCE SFP+ Adapter for IBM Power Systems
IBM #EC28 PCIe2 2-Port 10GbE RoCE SFP+ Adapter for IBM Power Systems
IBM #EC28 PCIe2 2-Port 10GbE RoCE SFP+ Adapter for IBM Power Systems

Home / Shop

IBM #EC28 PCIe2 2-Port 10GbE RoCE SFP+ Adapter for IBM Power Systems

Model Number: IBM FC EC28
IBM #EC28 regular-height PCIe2 x8 dual-port 10 GbE RoCE adapter with two SFP+ ports, CCIN EC27, FRU 000E1491.
Maximum quantity exceeded
Minimum purchase amount of 0 is required
Maximum purchase amount of 0 is allowed
Missing Inquiry Options
*Your Name:
*Your Email:
*Your Message:
Please send me a copy
0.000
Categories: IBM Interface Card
Manufacturer: IBM
Facebook
X
Email
LinkedIn
  • Description
  • Specifications

Feature #EC28 is the regular-height PCIe2 2-Port 10 GbE RoCE SFP+ adapter, CCIN EC27, FRU 000E1491. It is a dual-port, PCIe generation-2 card with a PCIe2 x8 bus and a PCIe 2.0 host bus interface, short in length and run from a 3.3 V supply. Typical workloads are high-transaction databases, cloud computing, virtualization and storage.

The two 10 Gb SFP+ transceiver ports connect to other servers or switches. Every port carries Ethernet at a nominal 10 gigabits per second over SFP+ copper twinaxial cables up to 5 m (16.4 ft), and the adapter provides link aggregation and failover for redundant connections.

Network boot is a limitation: an LPAR cannot be booted through AIX NIM or Linux network install from this card, and a system that installs from a network source needs a second Ethernet adapter with boot capability. Supported software is AIX 7.1 with the 7100-01 Technology Level and Service Pack 3 or later, AIX 6.1 with 6100-07 and Service Pack 3 or later, Red Hat Enterprise Linux 6.3 for POWER or later and SUSE Linux Enterprise Server 11 Service Pack 2 or later, with firmware level 7.6 or later.

Cables must be active SFP+ 10 Gbps copper twinaxial Ethernet cables that comply with SFF-8431 Rev 4.1 and SFF-8472 Rev 10.4 and are EMC Class A. They are available as #EN01 at 1 m (46K6182), #EN02 at 3 m (46K6183) and #EN03 at 5 m (46K6184).

Feature code#EC28
CCINEC27
Adapter FRU number000E1491
Ports2 x 10 Gb SFP+
I/O busPCIe2 x8
Form factorshort, regular height
Voltage3.3 V
Cablesactive SFP+ copper twinaxial, up to 5 m (#EN01, #EN02, #EN03)
AIX7.1 TL 7100-01 SP3 or later; 6.1 TL 6100-07 SP3 or later
LinuxRHEL 6.3 or later; SLES 11 SP2 or later
Firmwarelevel 7.6 or later
Network bootnot supported for AIX NIM or Linux network install