Home / Shop


- Description
- Specifications
The WS-X6148A-45AF is the enhanced-buffer 48-port 10/100 RJ-45 card for the Catalyst 6500, supplied with an IEEE 802.3af PoE daughter card (WS-F6K-GE48-AF) installed at the factory. PoE reaches up to 15.4 W per port. It belongs to the classic, shared-bus family of interface modules.
What sets the A-series apart from the original WS-X6148 cards is the larger frame limit of 9216 bytes, six port blocks of eight ports, and richer queues: Tx 1p3q8t and Rx 1q2t. TDR cable testing is supported, which locates faults in each copper run. Oversubscription is 1.2:1 on a single connection to the 32-Gbps shared bus.
Ports run over Category 5, 5e or 6 UTP/STP up to 328 ft (100 m). Pluggable transceivers are not supported and the card cannot be given distributed forwarding.
This is one of the cards that works with Supervisor Engine 2T as well as Supervisor Engine 2, 32, 32 PISA, 720 and 720-10GE, in any slot of a Catalyst 6500 or 6500-E chassis. Software starts at 12.2(50)SY on Supervisor Engine 2T and 12.2(18)SXF on Supervisor Engine 720. Gigabit copper models are in the Cisco switches range.
| Part number | WS-X6148A-45AF |
| Type | Cisco Catalyst 6500 classic 10/100 module with 802.3af PoE |
| Ports | 48 x 10/100 Mbps, RJ-45 |
| PoE | IEEE 802.3af daughter card (WS-F6K-GE48-AF) installed at the factory; up to 15.4 W per port |
| Frame size | Up to 9216 bytes |
| Queues per port | Tx 1p3q8t; Rx 1q2t |
| Oversubscription | 1.2:1, 32-Gbps shared bus |
| TDR | Supported |
| Cabling | Category 5, 5e or 6 UTP/STP, 328 ft (100 m) |
| Pluggable transceivers | Not supported |
| Distributed forwarding | Not supported |
| Compatible with | Supervisor Engine 2, 32, 32 PISA, 720, 720-10GE and 2T in Catalyst 6500 and 6500-E chassis |
