Home / Shop


- Description
- Specifications
WS-X6196-21AF packs 96 10/100 ports into one Catalyst 6500 slot using eight RJ-21 connectors: four across the top row and four across the bottom. The bottom connectors are inverted, with the highest port number on the left of each one, giving port runs of 60 to 49, 72 to 61, 73 to 84 and 85 to 96. Weight is 11.2 lb (5.08 kg).
This is the PoE-equipped SKU of the pair, shipped with an IEEE 802.3af daughter card and supplies up to 15.4 W per port. With power in place the module supports 96 Class 2 (7 W) devices or 62 Class 3 (15.4 W) devices. Cabling is Category 5, 5e or 6 UTP/STP to 328 ft (100 m).
Buffering is 1.116 MB per port, frames up to 9216 bytes are accepted, and queues are Tx 1p3q1t. TDR is not supported, there is no distributed forwarding and no pluggable transceiver support. Power figures are 3.16 A, 132.72 W of module power, 165.90 W AC input with 566.55 BTU/hour and 178.39 W DC input with 609.19 BTU/hour.
Supervisor Engine 2, 32, 32 PISA, 720 and 720-10GE work with it, and any slot in a Catalyst 6500 or 6500-E chassis will take it. Pair it with a WS-C6509-E 9-slot chassis, or see the wider Cisco switches category.
| Part number | WS-X6196-21AF |
| Type | Cisco Catalyst 6500 classic 96-port 10/100 module with 802.3af PoE |
| Ports | 96 x 10/100 Mbps, RJ-21 (eight connectors) |
| PoE | IEEE 802.3af daughter card installed at the factory; up to 15.4 W per port |
| PoE device count | 96 Class 2 (7 W) or 62 Class 3 (15.4 W) per module |
| Buffer | 1.116 MB per port |
| Frame size | Up to 9216 bytes |
| Queues per port | Tx 1p3q1t |
| Weight | 11.2 lb (5.08 kg) |
| Module current and power | 3.16 A; 132.72 W |
| AC-input power and heat | 165.90 W; 566.55 BTU/hour |
| DC-input power and heat | 178.39 W; 609.19 BTU/hour |
| TDR | Not supported |
| Compatible with | Supervisor Engine 2, 32, 32 PISA, 720 and 720-10GE in Catalyst 6500 and 6500-E chassis |
