Home / Shop / IBM / Parts (IBM / Lenovo)
- Description
- Specifications
The 44T0812 is the IBM battery for the FlashSystem 720 and 820. A FlashSystem 710 or 810 holds two batteries that supply emergency power to the flashcards in a sudden power loss; the 720 and 820 add a third battery so that emergency power stays redundant if one battery fails.
IBM is superseding 44T0812 with kits of matched batteries. For the 720 and 820 that is the three-battery kit 00DH682, and for the 710 and 810 it is the two-battery kit 00DH683. Once a kit is available, IBM says a failed battery means replacing all batteries as a set.
The battery contains lithium, so IBM tells you not to burn, charge, disassemble or heat it above 100 degrees C, and to exchange it only with an IBM-approved part.
To replace one, back up all data and shut the system down, remove the top cover, unfasten the hook-and-loop strap, then disconnect the black battery cable from the battery board and the small red connector on the second cable before lifting the battery out. On a 710 or 810 the battery end-of-life message can remain after the swap and is cleared by resetting the Battery Replacement Date in the diagnostics menu.
The systems this battery serves are the FlashSystem 720 and the FlashSystem 820; more IBM flash parts are under storage systems.
| 44T0812 Specs | |
| Part number | 44T0812 |
| Part | battery |
| Fits | IBM FlashSystem 720 and 820 (710 and 810 also use this battery part) |
| Batteries per system | 3 in a 720 or 820, 2 in a 710 or 810 |
| Replacement kit for 720 and 820 | 00DH682 (three batteries) |
| Replacement kit for 710 and 810 | 00DH683 (two batteries) |
| Battery type | lithium |
| Hot-swap | no (shut the system down first) |

