Home / Shop


- Description
- Specifications
AB218A is the configurable HP Integrity rx1600 server with one low-voltage 1.0 GHz/1.5 MB processor with one core, 512 MB of RAM as two 256 MB DIMMs, a 36 GB 10k rpm disk and a factory rack kit. The processor is a low-voltage Itanium 2 with 1.5 MB of cache and a floating point coprocessor included.
The rx1600 board is built around the ZX1 CEC and takes one or two Itanium 2 processors (Deerfield). Eight DIMM slots accept 512 MB up to 16 GB of memory with chip sparing, and DIMMs go in as pairs of equal density.
Storage is handled by a dual channel Ultra320 SCSI controller: the two internal hot-swap disk positions share one channel and the other channel is for external disks only. The server holds a maximum of two internal disks and a maximum disk capacity of 600 GB, with internal RAID support through an optional RAID card.
Two PCI-X slots, both 133 MHz and 64-bit on dedicated PCI-X buses, take add-in cards: one slot is full length and the other accepts cards up to 7.5 inches. Built-in I/O covers one 10/100/1000Base-T port, one 10/100Base-T port, an external Ultra320 SCSI port, two USB 2.0 ports and one RS-232 serial port.
HP-UX 11i version 2, Linux and OpenVMS are the three operating systems supported on the rx1600. Two power cords come with each system, one for the rack PDU and one for direct connection to a wall socket.
| Designation | HP Integrity rx1600 configurable server, factory rack kit |
| Processor | 1 x low-voltage 1.0 GHz Itanium 2, one core |
| Processor cache | 1.5 MB |
| Memory included | 512 MB (2 x 256 MB) |
| Maximum memory | 16 GB, 8 DIMM slots |
| Disk included | 36 GB 10k rpm |
| Internal disks | up to 2, maximum 600 GB |
| PCI-X slots | 2 (133 MHz, 64-bit) |
| Integrated LAN | 10/100/1000Base-T and 10/100Base-T |
| Ultra320 SCSI-LVD | 2 channels |
| USB 2.0 ports | 2 |
| Operating systems | HP-UX 11i version 2, Linux, OpenVMS |
| Processors supported | 1 to 2 |
| Other rx1600 server numbers | AB219A, A9901A |
