Home / Shop
- Description
- Specifications
AB219A is the configurable HP Integrity rx1600 server with two low-voltage 1.0 GHz/1.5 MB processors, 2 GB of RAM as two 1 GB DIMMs, a 73 GB 15k rpm disk and a factory rack kit. That fills both processor positions of the rx1600, which is a symmetrical multiprocessing server supporting up to two low-voltage 64-bit Itanium 2 processors.
Each processor carries 1.5 MB of level 3 cache, 256 KB of level 2 cache and 32 KB of level 1 cache, with single-bit cache error correction. The processors use 50-bit physical addressing and 64-bit virtual addressing.
Memory runs through eight DIMM slots with ECC and chip spare protection, up to 16 GB in total. Pairs of equal density are required, and identically sized DIMMs are loaded in quads to support chip sparing. Total memory bandwidth is 8.5 GB/s, split across two 4.25 GB/s memory buses, and memory latency is 80 nanoseconds.
Power input is 100-240V at 50/60 Hz with a maximum input power of 500 W and a typical input power of 370 W; typical heat output is 1165 BTU. A rack-mounted configuration weighs between 31 lb (14.1 kg) and 33 lb (15.0 kg) and measures 3.4 in high, 19 in wide and 26.8 in deep.
| Designation | HP Integrity rx1600 configurable server, factory rack kit |
| Processors | 2 x low-voltage 1.0 GHz Itanium 2, one core each |
| Processor cache | 1.5 MB level 3 per processor |
| Memory included | 2 GB (2 x 1 GB) |
| Maximum memory | 16 GB, 8 DIMM slots |
| Disk included | 73 GB 15k rpm |
| Internal disks | up to 2, maximum 600 GB |
| Memory bandwidth | 8.5 GB/s |
| Maximum input power | 500 W |
| Typical input power | 370 W |
| Rack configuration weight | 31 lb to 33 lb (14.1 kg to 15.0 kg) |
| Rack size | 3.4 in high, 19 in wide, 26.8 in deep |
| Other rx1600 server numbers | AB218A, A9901A |

