Home / Shop
- Description
- Specifications
A5158A is a PCI TachLite Fibre Channel adapter for HP-UX. Its driver ships with HP-UX 11.00, 11i v1.0, 11i v1.5 and 11i v2.0. Versions run B.11.00.01 to B.11.00.10 on 11.00, B.11.11.03 to B.11.11.09 on 11i v1, B.11.20.04 on 11i v1.5 (64-bit) and B.11.23.01 on 11i v2.0 (64-bit). The AR1201 release carried B.11.00.10 and B.11.11.09, added the Fibre Channel SNIA HBA API (a C library for SAN management software) and extended fcmsutil to report whether a Dino is present on the card, which marks an HSC TachLite card, the maximum frame size and the driver version.
Servers added in that release are the rp7400, B1000 and up, C3000 and up, and J5600 and up. Booting from A5158A needs the right PDC firmware on the system; the version is read at the BCH prompt with the fv command. The 11i v2.0 driver adds online addition and replacement (OLAR) and interrupt migration.
Earlier drivers carry fixed problems. Before B.11.00.04, a V-class system with four cards on a full EPIC/SAGA bus could run out of DMA mapping resources, so no more than three adapters go on that bus if one is an A5158A. Before B.11.00.05, a private loop with more than 40 NL_Ports could see a LIP storm. Before B.11.00.06, more than three A5158A adapters in a QuickLoop topology could do the same. L1000 and L2000 servers with 256 MB of memory and more than eight PCI cards need patch PHKL_22030 or release AP0900 or later.
Several servers take the card, among them the HP 9000 rp7420 and HP Integrity rx7620.
| Designation | A5158A |
| Manufacturer | HPE |
| Type | Fibre Channel host bus adapter, TachLite |
| Bus | PCI |
| Operating system | HP-UX 11.00, 11i v1, 11i v1.5, 11i v2 |
| Latest 11.00 driver | B.11.00.10 |
| Latest 11i v1 driver | B.11.11.09 |
| 11i v2.0 driver | B.11.23.01 (64-bit) |
| Added servers | rp7400, B1000, C3000, J5600 |
| Management API | Fibre Channel SNIA HBA API |
| Online addition and replacement | HP-UX 11i v2.0 |

