Home / Shop
- Description
- Specifications
AD355A is the HP PCIe 2-port 4Gb Fibre Channel host bus adapter, a PCIe x4 Gen1 card with dual-port multimode short-wave optical links at 4, 2 or 1 Gbps. Link distance over 50/125 micron multimode fibre is 150 m at 4 Gbps, 300 m at 2 Gbps and 500 m at 1 Gbps. The two ports use LC duplex connectors. The PCIe x4 Gen1 link carries 10 Gb/s in each direction, enough for a 4 Gb/s 2-port adapter at full speed.
The board is 168 mm long, 68 mm wide and 9.9 mm high, weighs 102 g and draws 7.5 W normally and 10 W at most. It complies with ANSI X3T11 Fibre Channel, PCIe Base 1.0a and PCIe Electrical/Mechanical 1.0a, and needs one low-profile (or full-height) x4 PCIe slot. Spare boards are AD355-67001 and AD355-67101, and the card appears as AD355-60001 in the ioscan fclp entries.
On HP-UX the card uses the fclp driver from the FibrChanl-02 software. For HP-UX 11i v2 the minimum is B.11.23.0712: earlier versions B.11.23.0706 and B.11.23.0709 could swap in incorrect data when I/O hits sequential blocks of one LUN from several address spaces, such as a swap device. The vital product data reads HP AD355A PCIe 2-port 4Gb FC HBA, part number AD355-60001. The yellow LED blinks once, twice or three times for a 1, 2 or 4 Gb link while the green LED stays on.
On a private loop, firmware 2.70X5 SLI-3 can stop I/O resuming after a cable is unplugged and replugged; moving to firmware 2.82X4 SLI-3 or later clears it. The one-port companion is AD299A. The HP Integrity rx3600 and rx6600 take AD355A.
| Designation | AD355A |
| Manufacturer | HPE |
| Type | Fibre Channel host bus adapter |
| Ports | 2, LC duplex |
| Speed | 4, 2 and 1 Gbps |
| Bus | PCIe x4 Gen1, low profile or full height |
| Link distance (50/125 micron) | 150 m at 4 Gbps, 300 m at 2 Gbps, 500 m at 1 Gbps |
| Size | 168 mm x 68 mm x 9.9 mm |
| Weight | 102 g |
| Power | 7.5 W normal, 10 W maximum |
| Spares | AD355-67001, AD355-67101 |
| HP-UX driver | fclp, FibrChanl-02 |

