Home » Store » HPE » HP-UX Interface Card » AD385A HP PCI-X 266 MHz 1-Port 10GbE SR Adapter

AD385A HP PCI-X 266 MHz 1-Port 10GbE SR Adapter

AD385A is a PCI-X 266 MHz 10 Gigabit Ethernet SR fibre adapter for Integrity servers running HP-UX or Windows.

Sourcing mission-critical hardware shouldn't mean gambling on auction sites or automated shopping carts. You get direct access to dedicated specialists who answer the phone, confirm exact compatibility, and deliver project-ready pricing built around your deployment timeline.

Home / Shop

AD385A HP PCI-X 266 MHz 1-Port 10GbE SR Adapter
AD385A HP PCI-X 266 MHz 1-Port 10GbE SR Adapter
AD385A HP PCI-X 266 MHz 1-Port 10GbE SR Adapter

Home / Shop

AD385A HP PCI-X 266 MHz 1-Port 10GbE SR Adapter

Model Number: AD385A
AD385A is a PCI-X 266 MHz 10 Gigabit Ethernet SR fibre adapter for Integrity servers running HP-UX or Windows.
Maximum quantity exceeded
Minimum purchase amount of 0 is required
Maximum purchase amount of 0 is allowed
Missing Inquiry Options
*Your Name:
*Your Email:
*Your Message:
Please send me a copy
0.000
Manufacturer: HPE
Facebook
X
Email
LinkedIn
  • Description
  • Specifications

AD385A is a PCI-X 266 MHz 10 Gigabit Ethernet adapter with SR fibre connectivity for HP Integrity servers. Its spare board is AD385-69001. On HP-UX it runs on the ixgbe driver in the 10GigEthr-00 bundle, B.11.23.xxxx for HP-UX 11i v2 and B.11.31.1003 for 11i v3, the same bundle that serves AB287A.

The distinguishing feature is 4-tuple hash based steering, added to the driver in B.11.23.0807 and in the 11i v3 release. The driver and card steer every packet by a hash of the source port, destination port, source IP and destination IP, with no lookup table, so all 8 queues on the card are used evenly for both TCP and UDP. The setting is switched on with lanadmin -X drv_rth_on and off with lanadmin -X drv_rth_off, and HP_IXGBE_4TUPLE_RTH in /etc/rc.config.d/hpixgbeconf set to on keeps it across reboots. With it off, port-based steering uses up to 4 queues, unless the number of queues is configured. UDP multi-fragment packets always go to the default queue.

HP recommends 4-tuple steering when the server has only a few listening ports with a large number of connections, and more than 16 CPUs. Driver B.11.23.1009 fixes an AD385A transmit queue hang. Moving card interrupts to another CPU causes a momentary link-down event on AD385A or AB287A, which can trigger a Serviceguard TOC when the card carries the heartbeat.

Windows Server 2003 on Integrity also takes AD385A in the rx8640, rx7640 and Superdome. HP-UX hosts include the HP Integrity rx3600 and rx6600.

DesignationAD385A
ManufacturerHPE
Type10 Gigabit Ethernet adapter
BusPCI-X 266 MHz
MediaSR fibre
HP-UX driverixgbe, 10GigEthr-00 bundle
HP-UX 11i v3 driverB.11.31.1003 or later
HP-UX 11i v2 driverB.11.23.1009 or later
Queues8 with 4-tuple hash steering, up to 4 with port steering
SpareAD385-69001